Jump to content

kevin79

Member
  • Content Count

    40
  • Joined

  • Last visited

Community Reputation

2 Neutral

About kevin79

  • Rank
    Enthusiast

Profile Information

  • Name
    Array
  • Location
    Array
  • Gender
    Array
  • Drives
    Array

Recent Profile Visitors

2,588 profile views
  1. Any idea how to splice the wires together? I got pinch splices for the backup light wire but the ground on the 7 pin plug is too thick. Sent from my iPhone using Tapatalk
  2. Thanks everyone. What should I connect to for the negative wire? Sent from my iPhone using Tapatalk
  3. I purchased a wireless license plate camera. Normally it would be connected by the reverse light but I can't get the screws loose to take off my rear light assembly. Where else should I connect it to? If it matters my truck has a 7 way plug. Sent from my iPhone using Tapatalk
  4. I currently have heated, power folding mirrors with a turn signal in them. I broke the mirror housing doing something stupid. Can I buy a replacement mirror that isn’t power folding and doesn’t have the turn signal as a replacement? Also, would I be able to use the housing with the glass from my current mirror? The glass on mine is fine, it is just the plastic cover that is broke. Sent from my iPhone using Tapatalk
  5. Thanks but I need the housing too. I probably should have specified that in my original message. Sent from my iPhone using Tapatalk
  6. I need suggestions for replacement fog lights. The set the came with my truck kept popping out and I bought some on eBay that were supposed to fit. The holes lined up but the were really loose. Those too popped out sometime when I was driving. What are good replacements at a decent price? Sent from my iPhone using Tapatalk
  7. I believe he second wire if for a brake controller. It was already hooked up and working correctly. That is assuming there are only two wires and not a third hidden somewhere. Sent from my iPhone using Tapatalk
  8. How would you check the 7 pin connector? Sent from my iPhone using Tapatalk
  9. I have an 09 Sierra with the trailer package. I have no power going to the 7 pin adapter even though the fuse is installed and the cable is hooked up to the pole next to the fuse box. I didn’t check to make sure the fuse is good but it is brand new so I’m hoping it isn’t bad. What else should I look at? Sent from my iPhone using Tapatalk
  10. It’s an 09, so warranty isn’t going to happen. Sent from my iPhone using Tapatalk
  11. So I would need to replace the rear spring leaf in order to level the rear? Sent from my iPhone using Tapatalk
  12. It appears that my truck is about 2” higher on the passenger side. How do I level it out to get rid of the lean. Do I need to replace the coil spring and rear spring leaf on the drivers side? Sent from my iPhone using Tapatalk
  13. That is what I’m trying to determine. I think my ride height is off. Sent from my iPhone using Tapatalk
  14. If I measure both front wheel wells to the ground (ground to top of wheel well), should it be the same for both front wheels even if the pavement is uneven? Sent from my iPhone using Tapatalk
  15. I have the same but on my rear wheel wells. How do I stop them from growing/spreading? Sent from my iPhone using Tapatalk
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.