Jump to content

spoolindawg

Member
  • Posts

    17
  • Joined

  • Last visited

Everything posted by spoolindawg

  1. Upgraded my 17 Silverado to this. Needs level and tires
  2. No rubbing before re the level, you are good to go
  3. Washed and waxed my truck today. A nice fishing trip to the beach turned into pulling 3 idiots out of sand they shouldn't have been driving in.
  4. 2017 LTZ 4X4 Texas edition current mods 20% tint over factory privacy glass all around Black bow ties Westin HDX nerf bars Bilstein 5100's all 4 corners (highest setting in front) BF goodrich KO2 275/60r20 De-badged doors AVS low profile vent shades eventually when work slows down i am going to color match the grill and headlight trim pieces.
  5. Heres the Westin HDX installed on my 17 LTZ. Fairly easy install, would have been a lot easier if the damn brackets were labeled, didn't even use the instructions as they were not very understandable. Also had hell getting one of the bolts started, ended up being some slag inside of the bolt hole on the running board. Not a fan of the way any boards look but couldn't justify the Amp researches, i also have a a very expensive gun and watch addiction I need to feed lol.
  6. 17.5 +/- 1 depending how I’m feeling or if I’m mashing the throttle in Houston lol. Get about 14 with a 16 foot trailer depending the load.
  7. I wouldn't call the bils at the highest setting rough but theres no bounce really compared to the factory shocks i replaced. bumps are a quick jolt. It can be a little hash at times but ill take that over the bouncing up and down any day. 5100s at highest setting on 275/60r20 KO2's
  8. I already have the fronts installed at the highest setting and tomorrow the rears should be here (5100). Hoping that they provide less bounce when pulling my trailer empty. heres my truck actually clean for a change. 275/60r20
  9. Just under 40 1/8 inches in the rear 39 even in the front. Been pulling a trailer and a loaded bed all weekend and it wasn't sqauting to bad at all.
  10. 0 lift in the rear in the pic. I can measure and post results, where do you measure from? Ground to wheel well correct?
  11. I never measured mine but from what I gathered most are getting 2 inches out of the 5100s. My truck seems to have settled a little, it looked higher at first. I have put about 200 miles on the truck so far.
  12. Here's my ltz, this trucks gotten me through the flooded streets of Dickinson over the last few days. Pulled a few cars out of the road and cleared a fallen tree that had a road blocked. Have the 5100s on highest setting. Tire size is 275/60r20. Going to add the rear 5100s soon and possibly some 1 inch blocks.
  13. Heres my 2017 LTZ 20% over the factory privacy glass all around 275/60r20 ko2's Awaiting the bilstien 5100s
×
×
  • Create New...