ronrymanr

Greetings I replaced the VSS on the transfer case w/ a Napa replacement. Still having the same issue. wires looking ok. any other thoughts welcome? Sent from my SM-J700T1 using Tapatalk

When I do a search for a replacement buffer the letters PYU are for a 95 k1500 is this a concern? I purchased a vss for a 1998 high milage Durango with RWABrakes. Does this 95 k 2500 have a speed sensor on the rear Differential as well as the transfer case ? or is there one on top of the transmission? I will replace the one on the tail of the transfer case first Im having trouble getting the plastic buffer snapped back in place. Any. experience with placement?thank you. I see the multitude of questions your trying to weed through so please forgive my inability to work one issue at a time[emoji223] Sent from my SM-J700T1 using Tapatalk

The P.O. had plow lights grounded using the abs ground wire. would front wheel sensor failure cause a non shift condition and no speedometer reading? My question about the speed buffer the info I have located is that the small 4 pin plug in pic is not used is that correct?? Sent from my SM-J700T1 using Tapatalk

Yes 4x4. where are they located the transfer case and ?? Sent from my SM-J700T1 using Tapatalk

Here are some better pics Sent from my SM-J700T1 using Tapatalk

pulled the buffer from the dash area. the small female connection in the pic has no plug in it. am I missing this plug? I cannot find one in the dash to plug into the buffer? Is this space supposed to be empty??? Im going to auto parts store to see if I can find a replacement. Its a Cheyenne with the 5.7 liter 350. With shifting loss. and loss of speedo only. thank you for continued support. Sent from my SM-J700T1 using Tapatalk