Ashtonross

Appreciate it man I’m gonna check those out tmr a see how far I can do down with them without making tires rub. I took some air out of the tires this morning an it helped a good bit they were at 75psi

All of you who saw my last post are **** bitches

Just got a 2017 gmc 2500hd with a 6in Fabtech lift it only has basic struts no coil overs is that normal? It rides very rough could I get better shocks/coil overs an maybe A arms to make it any better or just go down to a nice 4in lift?

Alright I’ll give that a try thanks

When I changed the tank I drained all the fuel out an put new back in an checked the tank to make sure it was clean. My air filter has been cleaned but it does have a small burn with a pen hole in it from hiting my header. I checked for a vaccum leak with starting fluid today but got nothing so I’m trying with a smoke tester tomorrow

If I was having some sort of spark issue I would think it would give a misfire code an I haven’t got one. After I check for a vacuum leak tomorrow I’m not sure what else it could be thanks for your time

I bought it off a guy who said he was the only owner it has 96k miles and has been airbagged some of the wiring under the steering column has been messed with but I don’t think any of it is damaged it also is missing the parking brake for some reason

I did run a fuel pressure test and it was below 40psi so I replaced the pump now it reads 60 but I still have the same issue. It runs just fine on the road but when coasting or idle it wants to die. I replaced all spark plugs today I haven’t checked all coil packs yet though. The sensors I replaced were all throwing codes to be replaced but replacing them didn’t take the codes away

Please help I recently purchased this truck after my last was totaled it ran perfect for two weeks an then randomly started idling really rough wanting to die out. I’ve replaced the fuel pump, spark plugs, starter, positive and negative wires from battery, new MAP sensor an the oil pressure sensor. It’s throwing po106 po507 po573 po2119 codes and when I clear them the truck won’t start. But it will crank up with starting fluid I checked fuel pressure an it’s at 65-70psi on startup please help