mopester

Here are some pics.

Finally got everything installed! I even hooked up the cigarette power outlets on the center console. Thanks so much for your help.

Found out what the problem was. The fuses on the monitor power wires were blown, except they were blown at the edge, not the center. So I could not physically see that they were blown until I put the tester on them. I'll be finishing up on the monitor install tomorrow.

I can't believe it. I finally had both of the monitors working with RAP and everything. But when I went to make the final connection and tuck in all the wires, something happened and now they are not powering on... The MBEC fuse is fine and both the fuses for my monitors are still good. Maybe something happened and the relay got busted....?

Ok, checked the fuse for MBEC and it's not blown. I tried powering the center console cigarette outlet with just the blue wire and it won't come on. Could it be possible that my truck is not wired for this? If this doesn't work, where else can I tap in so I can use my headrest monitors?

Just hooked everything up and the headrest monitors are not powering up...? I got all the wires in the right place... The only thing extra I did was extended the yellow wire so it could reach the headrest monitors' power wires. I also want to power the cigarette power outlet on my center console that I recently purchased but I don't know... Am I missing something here? I have the LS(WT) version of Silverado by the way. Any help would be appreciated.

Good idea. I'll do that myself. Thanks.

Ok, just installed the wires but where should I mount the replay?

Thank you so much for your quick reply. There is a fuse on the wires coming from the headrest monitors. I'll give it a go and let you know how it turns out in a few days. Without seeing the directions for your monitors I would guess that the black wire is ground. If so then no, only the red wire to yellow. Also anything connected to the circuit should be fused.

Thanks for the great write up. I'm going to install headrest monitors using your instruction. I have one question. Am I supposed to connect both red and black power wires from the headrest monitors to the yellow wire? Thanks for your help.