Search the Community
Showing results for tags 'parking lights'.
Found 4 results
-
2020 Sierra 1500 SLT After searching and reading through many threads without the specific answers I'm looking for, I'm hoping for some information and advice. I'd like to have 1 )the fog-lights come on with the parking lights, so the fog-lights are on all the time (even staying on with high beams if possible) 2) the Cargo Lamps illuminate when the truck is in Reverse. I'd like to know what plug/pin number to jump with the diode and what size diode/direction the diode goes (which way the stripe faces). Bonus points for photos (see below) I found this photo in a 2014 - 2018 GMC thread. The thread said the brown to pink is the cargo-reverse light mod and the brown to brown was the parking lights-fog lights mod. Are the plugs/wires/diode direction the same for the 2020? Is the 1Amp D1 diode the right one for these mods? Is the diode just pushed into the back of the plug, alongside the wire? I'd appreciate any help that can be provided. Please be sure to dumb it down for me and any other future searchers. I know I need all the help I can get!! Thank you for your time, DC
-
Ok, so after many weeks trying to fix this.. I have a 2013 Silverado LT 4x4 extended cab 4.8L. A couple months ago I was driving thru deep snow and my parking lights went out. (not sure if that was a coincidence or not) Anyway.. I checked the 3 fuses under the hood, all had no power) I switched the relay for the parking lights, didn't fix. I looked at fuses, none were blown. I replaced the distribution block where tail lights plug in with lic plate lights and trailer lights. (was a little corroded, didn't fix the problem) If I run a power wire into the feed side of the fuse block under the hood ( half fuse goes into the power side other half goes to the lights. ) the parking lights work... By the way all the other lights work (headlights, turn signals, brake lights) I tried looking for maybe a faulty ground but wasn't sure where one would be that connects just the park lights. Please help. Im at my wits end... Any help would be great -
2020 Sierra 1500 SLT After searching and reading through many threads without the specific answers I'm looking for, I'm hoping for some advice and information. I'd like to have 1 )the fog-lights come on with the parking lights, so the fog-lights are on all the time (even staying on with high beams if possible) 2) the Cargo Lamps illuminate when the truck is in Reverse. I'd like to know what plug/pin number to jump with the diode and what size diode/direction the diode goes (which way the stripe faces). Bonus points for photos (see below) I found this photo in a 2014 - 2018 GMC thread. The thread said the brown to pink is the cargo-reverse light mod and the brown to brown was the parking lights-fog lights mod. Are the plugs/wires/diode direction the same for the 2020? Is the 1Amp D1 diode the right one for these mods? I'd appreciate any help that can be provided. Please be sure to dumb it down for me and any other future searchers. I know I need all the help I can get!! Thank you for your time, DC
-
Hi guys, hopefully someone out there in GM world can help me. I'm installing an aftermarket running board lights which has courtesy lights and turn signal lights. I looked every where to get some concrete answer where i can tap into the OEM parking lights wire, courtesy light wire, and turn signal wire. Now, I realize i can run them into the hood and into each headlamp but I much rather keep the connections neat inside the cab. I looked at the GMUPFitter manual and quite honestly it might as well be in chinese to me. If any one has any info with pictures broken down Barney style I would appreciate it. Also if you recommend not tapping into any wire coming from the BCM then where would be the best place to tap into? Thanks in advance to everyone who is willing to help! @pgamboa any suggestions?
