Search the Community
Showing results for tags 'foglights'.
Found 8 results
-
2014 Sierra 1500 SLE 6 cyl 4WD This truck didn’t come with fog lights but the dashboard instrument panel does have a fog light indicator spot for them. My question is, which BCM connector and PIN number (OR whatever wire underneath) controls power to light that lamp? My plan is to use @TinkeringFox‘s excellent video to add a latching relay device and send power to that lamp (so it lights up and appears OEM) and also send power to an aftermarket Morimoto fog light harness relay to light the fog lights. Thanks for any thoughts on this.
-
2020 Sierra 1500 SLT After searching and reading through many threads without the specific answers I'm looking for, I'm hoping for some information and advice. I'd like to have 1 )the fog-lights come on with the parking lights, so the fog-lights are on all the time (even staying on with high beams if possible) 2) the Cargo Lamps illuminate when the truck is in Reverse. I'd like to know what plug/pin number to jump with the diode and what size diode/direction the diode goes (which way the stripe faces). Bonus points for photos (see below) I found this photo in a 2014 - 2018 GMC thread. The thread said the brown to pink is the cargo-reverse light mod and the brown to brown was the parking lights-fog lights mod. Are the plugs/wires/diode direction the same for the 2020? Is the 1Amp D1 diode the right one for these mods? Is the diode just pushed into the back of the plug, alongside the wire? I'd appreciate any help that can be provided. Please be sure to dumb it down for me and any other future searchers. I know I need all the help I can get!! Thank you for your time, DC -
I traded in a 2020 2500 truck for a 2021 2500 Denali and have nothing but problems, and the Dealer I have been using has not been helpful at all. The primary problem is the radio screen will go blank while driving down the road, but the steering wheel controls still work. The radio was flashed to the latest update, and still has the same problem. Code U0184:00 The power folding mirrors went out and the dealer took four months to replace the mirrors to resolve that problem. I picked up the truck and drove home and the fog lights stayed on until I cycled the ignition 3 times. The next day the reverse lights were on all night, until I cycled the ignition a few times, while driving down the road (with the reverse lights on) the camera view was active. NOW the dealer says the truck is out of warranty and can't help!! 20220124_084706_2.mp4 -
2020 Sierra 1500 SLT After searching and reading through many threads without the specific answers I'm looking for, I'm hoping for some advice and information. I'd like to have 1 )the fog-lights come on with the parking lights, so the fog-lights are on all the time (even staying on with high beams if possible) 2) the Cargo Lamps illuminate when the truck is in Reverse. I'd like to know what plug/pin number to jump with the diode and what size diode/direction the diode goes (which way the stripe faces). Bonus points for photos (see below) I found this photo in a 2014 - 2018 GMC thread. The thread said the brown to pink is the cargo-reverse light mod and the brown to brown was the parking lights-fog lights mod. Are the plugs/wires/diode direction the same for the 2020? Is the 1Amp D1 diode the right one for these mods? I'd appreciate any help that can be provided. Please be sure to dumb it down for me and any other future searchers. I know I need all the help I can get!! Thank you for your time, DC
-
Anyone here try to install the flushmount LED foglight pods in the lower valance where the tow hooks usually go? I don't have the tow hooks on my truck so I was just wondering what it would look like or if anyone has already done it. Maybe even a single row light bar going across from where the hooks would usually be, in the small space that's there?? Here's a pic of where I'm talking about.
-
Hello everyone, This is my first post and I am happy to be here. 'Read many other threads on this forum and I know I'm in good company with ya'll. I searched, and scoured the web (and this forum), and could not find a thread or post that throughly covered the topic of Original Equiptment lighting. Maybe there is a Chilton's or a Haynes Book that covers this? This question popped into my thoughts as I began shopping for an overhead light bar. Of course, lumen, beam flood angle, and beam throw distance were the first specs I poured over, but then I thought about Kº (light temperature in Kelvin degree). It might be cool if this new light added to the truck would match the existing. (I'm pretty happy with the factory lighting choices on my SLE). So I pulled the headlight bulb to find a PHILLIPS hHIR2 LL 55W 9012 LL, Made in Germany. (See photos). When I compare the various replacement bulbs offered by Autozone, the replacements can range from 3000, 3200, 4100, to 4200º Kelvin. This thread might be helpful to others working on interior lighting, or other lighting as well. Anyone out there have professional photography equipment that can meter, or sense color temperature? Are different trucks different temps? Thanks for any info involving measurements, photos, specs, or thoughts that might be helpful to me or to US as a community of owners and technicians. Hopefully this thread could help others too. Thank you. -
whats up guys I have stuff off of my old nnbs ext cab and my current 2014 Denali Sierra Everything is located in Los Angeles area and will ship everything. I will try to split shipping with buyer. i will also be posting things up for sale on another forum and locally so i will update thread as sales happen first is a set of 2014 Denali 20'' take offs they are very clean overall a few scuffs but no pitting or stains on the chrome im asking for 800$ tires were marked on the CPO paper work in late November as 7/32 rears and 8/32 fronts removed from truck in December also selling 2 sets factory Sierra/Silverado round foglights. one set has small road marks but not cracked all mounting tabs in place second set was removed at 1000 miles off of my brothers silverado 2500 basically new Crew cab Denali chrome removed I have the following parts availbale. 4 door handles 75$ 4 window trims 140$ Factory chrome steps 250$ The following parts were removed from my NNBS Ext. cab 1 stock radio 6cd 40$ 2 black texture door handles 35$ 2 gray stone metallic painted handles 35$ 1 Subthump under seat 10" sub box 65$ 1 pair of gray stone metallic power side view mirrors 100$
-
how many of you are running hids in your foglights..??? and if so what wattage and color..?? have heard of some ppl having problems with them melting there housings..i am wanting to install 35W 5500K TRS his in my foglights but wanna hear from ppl that have been running them successfully..
