Search the Community
Showing results for tags 'single cab'.
Found 2 results
Need help with possible electrical hookup
Dazedswift posted a question in Ask the GM TechnicianHello! To whomever may have any advice. I recently bought a 2005 gmc single cab with a 6.0 4l80e that wouldn’t start unless you put a little fuel down the intake and jump the starter(which I didn’t do bc I’d rather fix the problem logically). Anyways so a problem that I found is that he had actually broken the ignition interlock cable on the steering column and you were actually able to turn the key by hand but turning it to the start position wouldn’t do anything other than a like if you would say meh out loud that’s literally what the engine or I believe the electrical would sound like when you turned the key into that position. So I replaced the wire from a donor steering column which was a PAIN!!! anyways I have the original column in with the new wire but it’s still not trying to start at all. I also noticed that the throttle body doesn’t open when you press the Gas and you can’t push it open. It also makes a small humming noise like it wants to try to open and slightly vibrates. Also so I jumped the 87 pin on the starter relay to the positive and the engine turns over but won’t fire and start. I’m assuming that it’s a fuel problem(yes I put fuel in the tank today 7gals). So my next theory is going to maybe test the starter? I’m not really educated on this stuff but I do have the tools for the most part. Any advice would be appreciated. ALSO it has a newer ignition Solenoid and it has the lock and car light on the dash so I’m not sure if the new keys have to be programmed and that has anything to do with it? Maybe? But I’m not sure and thank you again! I’ll post a link to a YouTube video tomorrow to show exactly what’s going on and what I’m working with for a visual!
1999 Silverado 5.3 lost power
Tommy99RCSB posted a topic in 1999-2013 Silverado & Sierra 1500Today I was driving and my service engine soon light came on then I went to give it gas and there was most of its power gone I pulled over waited about 20 minutes, truck started right up, idled perfect, oil pressure 40, so I drove the truck home barely any power foot to the floor the whole way home. But 3 days ago I did cut the muffler off to take measurements for the new one I planned to put on today, I don't know if that could've affected anything. any information would be awesome thanks