gmckid

By the way remote programmed in 1 minute flat.

I'm dancing here this girl has 602,000 km on here now were going for a million ha ha Thanks again you ever need anything up here in Toronto I'm your man.

YOU ARE A BLOODY FUC...... GENIUS I TOOK MY TEST LIGHT TO ALL FUSES THE TBC FUSE ONLY LIT UP ON 1 SIDE OTHER SIDE DEAD FUSE DID NOT WANT TO COME OUT.FINALLY IT CAME IN 2 PIECES IT WAS ALL CORRIDED. BOOM STARTED AND KEPT RUNNING FIRST CLICK YAHHHHHHHHHHOOOOOO. THANK YOU THANK YOU THANK YOU. yOU ARE AWESOME AND A TRUE LONG DISTANCE FRIEND YOU REALLY HUNG IN THERE FOR ME. THANK YOU

remote worked before battery died .Checked remote at dealership worked.Have to asume the the remote and security system are not coincidence they share same problem or remote can not be programed with security issues going on.Never had cylinder ignition problems.I give up need to start thinking of bypass any advice.Scanner I think is decent does abs and airbag its autotel.

tried to fix key fob no luck intructions say for 2wd I'm 4X4 any difference?

when ignition on yes when ignition off no

the only thing I left out is I charged battery a few times thought it was still good checked at 12 v went dead again checked had 8v changed to crappy battery that had 12 volts today brand new battery.Two days ago removed drivers side window to remove door handle to swap out lock cylinder to make door lock work.there you have it. Will look up reprogram for key fob there are a few different ones for this year. Thanks again,wish I could buy you a beer.

what about getting key fob to work to turn security off?

well I have tryed everything(well not everything) rechecked for codes, new battery,damn security light will not stop flashing during relearn and will stay constantly lit when truck unattended.

Same thing security indicator will not turn off keeps flashing between security and battery Will try again starting at step 1

new battery installed going through relearn will keep you posted

yes that is the procedure I used the problem is security light never turns off i have done this several times.The only thing that I haven't adhere to is having a decent battery it does have 12volts put is weak will not last overnight hence battery charger.

Remember battery was dead so no horn or flashing lights.. I truly appreciate your effort.

Yes truck ran fine before parking, Do you think a new key would fool system into relarn mode.

Good Morning, Thanks for Reply. Yes i have my own scanner it picks up the abs relay the other codes I have are through a couple of sub menus on scanner which are above me the sub menu is BODY to SIR then I get code 53-dis 4X signal interupt code 36-passenger loop energy reserve feed code 71-defective derm code 83-driver reserve diode shorted I do not understand these codes or there meaning or if they are par for the course for the passlock. Truck was broken into by wedging passenger door open and sliding unlock lever. Thanks in advance.

Hi this is my first post,my truck is a 1999 gmc Sierra 2500 4x4 with 6.0 litre engine.I parked my truck for a few months and the battery went dead since the day I owned the truck the door locks never worked and I always used the factory key fob for locking and unlocking the doors.I have since swapped the door cylinder so I have a working drivers side lock that works with key.When the battery died I needed to get into the truck to open hood so I could service battery so I broke into truck.Now the truck starts immediately and then dies classic passlock symptoms.I have tried both relearn methods the 10 minute method and the 30 minute method.When the truck is sitting the security light is constantly on bright orange.When I try relearn procedures the security light alternates between flashing battery then back to security this continues and never stops flashing between the 2.I have always had battery charger hooked up to prevent battery dying.I dont know if this makes a difference I also pulled the abs fuse years ago I doubt this is a factor but I thought the more info I give the better quality awnsers I may get.The other thing I would like to disclose is that my key fob has lost its programming and needs to be reprogrammed to unlock doors,will this reprogram while passlock is active.Had fob checked at gm dealership it is functional. Any help greatly appreciated.