14GMC14

Still available? Sent from my SM-N950U1 using Tapatalk

Thank you pgamboa for your help with my mirror upgrade. Your harness was easy to install and all the info you provide was very useful. Shipping was extremely fast. I am very satisfied. Thanks Sent from my SM-G950U using Tapatalk

Thank you for the information. I will update the first post once I have more time. Sent from my iPhone using Tapatalk

Thank you. The springs that I got aren't gold but they are bigger than the ones I removed and bolted on with no problem. But I am interested to know if the ones that you are getting are different. Sent from my iPhone using Tapatalk

I have a Volant cold air intake just removed the cover on it for the air to go in. Sent from my iPhone using Tapatalk

Could you provide the correct part numbers. The ones that I have are the ones on my invoice and knowing how bad the guys at the parts department are I'm not surprised that they are wrong. But as far as parts go they are not the same ones that I removed from my truck hinges and springs are bigger. I ordered everything using a vin out of one truck that they had in stock but it was a headache dealing with the parts people. They were no help. And kept ordering wrong parts so that might explain why the numbers don't match. Sent from my iPhone using Tapatalk

Added some pictures. Sent from my iPhone using Tapatalk

I don't think they offer them pre painted I ordered mine at my local dealership and that was the only part number that was offered. Sent from my iPhone using Tapatalk Thank you. The worst part was getting all of the correct parts that I needed. The people at the parts department aren't very helpful at my local dealership. The hood comes ready to be paint so I guess paint depends on where you go and how much they charge. I payed $400 for mine. As far as labor goes I ended up installing it myself. Was really easy to do just a couple of screws for the hinges and springs. Sent from my iPhone using Tapatalk

This should help I found it in FB I just don't know what part numbers are for the springs and hinges. Also the part number here for the duct on gmc is incorrect. Sent from my iPhone using Tapatalk

I mainly did it just for looks but I am sure it should help the engine get more air and more power. I don't have any pictures of mine from under the hood but this is what it looks like under the insulator. Sent from my iPhone using Tapatalk

Yes that's what it is. And the only thing that was changed was the hinges and springs from a 2500. Other than that nothing else. Sent from my iPhone using Tapatalk

I'm not sure I didn't check I went with chrome because of my grill. Sent from my iPhone using Tapatalk

It's metal. Yes I have a cold air intake so It worked out. Sent from my iPhone using Tapatalk

Around $1300 Sent from my iPhone using Tapatalk

Just finished my HD hood install on my 2016 GMC And I would like to share the part numbers and information for anyone that would like to do the same. This should be the same for 2014 and up. For Silverados I think the same parts are required just different part numbers. Parts: Nut Part Number: 11546860 $2.31 × 4 $9.24 Assist Spring, RIGHT Part Number: 23258272 $17.24 × 1 $17.24 Insulator Retainer Part Number: 11571159 $2.84 × 6 $17.04 Insulator Part Number: 84101780 $63.22 × 1 $63.22 Duct Part Number: 84167144 $211.30 × 1 $211.30 Hood Part Number: 84152916 $385.56 × 1 $385.56 Vent Part Number: 84183578 $105.49 × 1 $105.49 Spring Part Number: 23258271 $17.79 × 1 $17.79 Hinge Part Number: 84097791 $27.83 × 1 $27.83 Hinge Part Number: 84097792 $27.83 × 1 $27.83 * Subtotal Amount: $882.54 Prices based on GMDirect Sent from my iPhone using Tapatalk

I had to get it painted they don't offer it with paint unfortunately. Sent from my iPhone using Tapatalk

Thank you. Had to order a few parts I will be posting better pictures and part numbers later. Yes it is functional. Sent from my iPhone using Tapatalk

HD hood installed. Sent from my iPhone using Tapatalk

Thank you. Sent from my iPhone using Tapatalk

Thanks. Not exactly sure what all has to be done yet I have the paint shop doing the work but I will let you know once it is done. I got the idea from someone in fb. Yes I have the wireless charging center console installed I plan on getting leather soon. Sent from my iPhone using Tapatalk

Installed tow hooks and chrome skid plate. 2017 HD hood at the paint shop. Sent from my iPhone using Tapatalk

Thank you. No build thread sorry. Some details: 2016 2WD 5.3 Volant Cold Air Intake, Elite Engineering Catch Can, Borla Exhaust Borla Tips, 4/7 Belltech drop, 22" OEM wheels, Continental Tires, Vinyl wrapped bumpers, Denali Grill, Center Console swap. I ordered the truck with almost every option available including spray bed liner, navigation, parking sensors, and lane departure. Just my weekend truck planning to do more but taking it slow. Sent from my iPhone using Tapatalk

275/40R22 Continental 4/7 Belltech Sent from my iPhone using Tapatalk

I will look in to that. Was looking at 285/35/22 but that seems too small. I see that you wrote that you rub on full lock which is not a big deal to me. Any issues on bumps?

Got some OEM SEY 22" now I need to get smaller tires these 285/45r22 rub. Any suggestions?