Jump to content

Herd Thinner

Member
 View Profile  See their activity

  • Posts

    27

  • Joined

  • Last visited

 Content Type 

Everything posted by Herd Thinner

  1. Herd Thinner
    Thank you sir. That I did not know.
  2. Herd Thinner
    $150 shipped anywhere in lower 48 states. Going to sell my handheld from blackbear. The tune that is on it now is for my 2015 6.2 Sierra. It’s $600 for a new handheld and tune from them so there are some savings here. This was used on my 2015 8spd. Sierra 6.2 if you need more photos let me know. I could only upload one.
  3. Herd Thinner
    I have a 2015 GMC Sierra 1500 6.2. 71000 miles I need a new torque converter. I know there is no science to how long before it damages the transmission or totally blows up. What is the average best guess on miles I can drive before I’m SOL. I need to get 500-600 miles out of it. Thanks in advance.
  4. Herd Thinner
    How many miles since the last change
  5. Herd Thinner
    I have a 2015 GMC Sierra 1500 6.2. 71000 miles So I’ll cut to the chase. I caught the shitty tranny, I opened the door for jokes lol. Seriously torque converter issues etc. I’m curious how many of you all who changed just the torque converter ended up with no other issues regarding the torque converter or transmission ? Are there aftermarket torque converter that are better then shitty GMC? I’m trying to decide fix or bail on this truck. Thanks in advance.
  6. Herd Thinner
    So I have the 35W system........issue that just stated a month ago is as follows: drivers side would work sometimes ......then go out.......now its out completely: I tested the bulb, wiring, adaptor and I am at a loss.......I am guessing it is the ignitor or the ballast..... Thoughts ....
  7. Herd Thinner
    Pm sent bro quote name="ClemsonFan" post="1743190" timestamp="1452997522"]Hi guys, I am in the middle of this retrofit. I have the RX 340 projectors mounted, wires ran, but the headlights will not come on. The LED strips and turn signals are working. I have the relay hooked directly to the battery terminals (+ and -). The capacitor link is grounded (I sanded the spot). I have the OEM input from the passenger headlight plugged into the relay. I even reversed this connection to test for polarity. I do not have the plug from the drivers side headlight hooked to anything. I've watched the videos from FastHeadlights and Fondupot. The only difference I can find is that I am not using a straight d2s to amp adaptor and do not have the same ignitors. I think my ignitors are built into my bulb plug. I only have one cord going from the bulb to the ballast. Any ideas would be appreciated.
  8. Herd Thinner
    Thanks bro. I didn't want to bug you on thanksgiving since I'm constantly asking questions. The new lights are so nice. My install looks good too. lol. quote name="FastWS6TA" post="1716829" timestamp="1448673013"] Hey brotha. Just raise up that driver side a hair. I think the little squares are reflection off the oem chrome parts. I have the same on mine.
  9. Herd Thinner
  10. Herd Thinner
    Two questions: Any idea what the causes the three little square above my lights on the wall. Also for adjustment is the cut off correct or can I fine tune that line. Seems to have a lighting bolt type line going on. Thanks
  11. Herd Thinner
    It was the Moritoto frx. I got it working. The link from the capacitor to the OEM and the capacitor to the relay are to long. I had to dremel them for a better fit. I also had a bad adaptor. I'm waiting for a replacement.
  12. Herd Thinner
    I just finished mine. Plug and play. A few little mods here and there but not to bad. Although it took me sometime. I went slow.
  13. Herd Thinner
    2015 Sierra.
  14. Herd Thinner
    Ok some guidance. I retro fitted my lights. Have everything wired up. Set truck to auxiliary and turned headlights on. They flashed on then off. Then nothing. I can't repeat it unless i unhook the battery and wait almost like letting a circuit breaker reseting. Fuse in the relay fine. I do know The high beam and low beam switch inside the truck work or the sound of the headlight moving work but no light obviously. Only thing i could think is wrong is the capacitor to the OEM attached to the light bulb isn't connecting so the switch inside works proper . I grounded it to the same spot I have my amp boards so the ground should be good. Help me .
  15. Herd Thinner
    What brand bulbs has everyone been using you the rear turn signals when switching to LED. Do you have to get the VLED anti flicker for 20 bucks or can you straight up change them.
×
×
  • Create New...