Jump to content

Fireguy63

Member
 View Profile  See their activity

  • Posts

    53

  • Joined

  • Last visited

 Content Type 

Everything posted by Fireguy63

  1. Fireguy63
    Depending on the kit the plug will need to be flip the truck uses reverse power so if it's positive on the ballets gonto nagitive on truck only kit I have found that you don't have to do this is with the DDM kit I have with the canbuss ballets
  2. Fireguy63
  3. Fireguy63
    I had that happen with my first set of hids I got light was on and no remote start all I did was disconnect the lights and put them back and it work fine the next day I drive a little bit and the light went off after like a day or 2 and my remote start work fine You could do the battery disconnect and reconnect it
  4. Fireguy63
    If your going to go with DDM tuning like I did don't order them online call them and explane what you have and they will get you the right kit that's what I did to make sure it was right it's just me I like to talk to someone from the company before I order to make sure it's right also I got your message just haven't had time to take new pics to send you I deleted the ones on my phone by accident I'll send them to you tomorrow
  5. Fireguy63
    Dust cap went right on no prob I didn't use H11 I have a gmc with projector head light so I use a 9012 non angled and had no problems send me a pm with your email and I can email you pics of it so you can see my from has a 14 Chevy and he had no problems with his
  6. Fireguy63
    Yes I got the ones from xenon depot they fit nice but didn't work I got the 55 watt ballest with power supply harness and caps nothing work and the plugs to go in the dust cap to come out into the ballest like most are part of the granite to seal these were not they were a separate wire that I had a cut into the grommet to feed the wires through so I sent them back they sent me my money back and I went with DDM tuning Iv had them in the past with no problems and I got the 35 watt canbus set just plug and play no caps no error light indicators it's all incorporated into the canbus ballast no problems at all love them if I fuger out how to load pics on here I would post some pics of them but don't know how to take a 1mb pic
  7. Fireguy63
    Anyone now of a good video or step by step pics to take the grill off a 2015 gmc Serria I saw a few videos but they suck one that was good the guy tells you how to donut but dosent show u
  8. Fireguy63
    What's your email
  9. Fireguy63
    That's what I thought but the gromet has 4 holes for wires and only 2 on it I think really they just forgot to put the other 2 wires on the gromet but I would have to cut the 8"" wire feed it threw and reconnect it I wish I could get the pics to load and I could show you better
  10. Fireguy63
    ok all heres my question i just got my hid kit trying to put it in my 2015 gmc with the projector head light now my prob is when i take the dust cover off and pull the factory plug out and put the hid in there no way for the factory plug to get out threw the 1'' hole i have to drill on the dust cover the rubber grommet that came on the builb has 2 extra holes on it and also came with a 8'' extenchen plug I'm thinking if i just cut the 2 wires on the 8' plug and feed them threw the hold into the housing and thing use butt connectors to splice them back and then plug that into the cap and then into the relay harness has anyone had to do this before so i can put the dust cover back on i tried to upload the pic of what i have but it says its to big
  11. Fireguy63
    Thanks for the helpful info
  12. Fireguy63
    Ok do you remember the name of the kit you got
  13. Fireguy63
    Just not sure if I should get the single beam 9012 or the high low 9012
  14. Fireguy63
    http://www.xenonhids.com/9012-single-beam-full-xenon-hid-conversion-kit.html?gclid=CKPGr8i5t84CFQesaQodwlELTg These are what I was thinking of getting come with power harness and plug and play flicker caps
  15. Fireguy63
    Ok cool thanks I just read a lot about capacitors and stuff didn't know if it was something new on the harness I had hids years ago in my old dodge and never needed the harness so wasn't sure
  16. Fireguy63
    Are the anti Flickr caps the little add on harness for flickering or do I have to wire them in on the relay harness
  17. Fireguy63
    Ya I'm told it's a 9012 build from vleds for the hid cause the shutter changes the light output they said just the one bulb and the shutter opens for more light output when I hit the highs Do the capacitors come on a harness or I have to wire them in
  18. Fireguy63
    Hey all I'm new here I have a 2015 Gmc and thinking eather hid or led never had less before but I have had hids in past trucks but never with the projector lens I was looking at DDM 8000k with the wire harness but do I need to do anything with resisters or anything else I don't wanna. Burn up the housing what do you guys recamend also should I get 35w or 55w I wanna get LEDs from vleds for fog lights and also is there a way to disable the day time running lights
×
×
  • Create New...