LowUfo
-
Posts
32 -
Joined
-
Last visited
Recent Profile Visitors
1,166 profile views
LowUfo's Achievements
Enthusiast (2/11)
10
Reputation
-
The top piece of the dash is easy to remove. I don't have any photos, but you can do a YouTube search or search on this site.
-
I absolutely 110% love the Diamond Audio Sub! Zero problems with it. I installed the bass level knob up front on the dash - it adjusts bass level perfect. I have the larger-option under storage seat box, the sub fits no problem. It does take up a fair amount of room, but I still have quite a bit of storage available. I highly recommend this sub!
-
2023 GMC Sierra Elevation. I replaced the factory manual folding mirrors with the power fold mirrors, task lights, cameras, and puddle lights. I know the pin on the mirror that lights the puddle lights. Does anyone know where to connect the puddle lights to so that they will come on when the doors are unlocked? Thanx
-
I confirmed that Pin 5 works to turn the puddle lights on (test bench checked). When I finally get some time to do the install, would the power source come from K9X6 pin 4 (door unlock)? If so, do I need to install a time delay (off) relay so the puddle lights stay on for a number of seconds, or does pin 4 keep power on for 10 to 15 seconds? Where did you power your puddle lights from. Also, has anyone got their driver's side mirror dimming to work? That should be Pin 17. Where did you connect the power source to?
-
Been super busy at work. I have a few days now to get everything working. Trying to find the proper connectors to fit, as the OP has the wrong size. I really don't want to push the wire through the connector and fold the wire back
-
What are the pin numbers on the mirror for the puddle lights? Where do they connect on your truck?
-
I now have the factory mirrors with camera, puddle lights, perimeter lights, blind spot indicator. Controller, switch, and wiring are almost done now. I want to connect the puddle lights so they work. Does anyone know how to connect them? 2023 GMC Sierra Elevation
-
Where can I find a parking light wire to tap into?
LowUfo replied to Morgan McGinnis's topic in Modifications, Wheels & Tires
I used a mini fuse tap and connected it to the parking light fuse under the hood. Works perfect for cab clearance lights I installed -
My truck is the 2023 Elevation with 360 cameras and front perimeter lighting. I cannot get any aftermarket mirrors that are set up for the 360 degree cameras. No auto wreckers around have mirrors or anything on the new trucks. May have to look at getting factory GM mirrors...
-
Yes. The "add a fuse" is a smaller amperage that the original fuse, so it will blow first if there is a problem (no problems at all)
-
I have the factory LED lights on mine. Connected to the "park lights" . Something like a 5 Amp fuse. No problems
-
Dumb question: Pink K9 X6 module pin 2 (lock) and Pin 4 (unlock) connected to the controller. Is this only required if you want the mirrors to fold/unfold when doors are locked/unlocked? If a person ONLY wants the mirrors to fold/unfold with the momentary toggle switch, can we skip connecting to the Pink K9X6? Thank you.
-
Easy to do. Used same measurements as from a 2500HD. No problems. No leaks, Power wire connected under hood with "add a fuse" connected to park lights.
-
You should be ok. My Elevation has the center console with the factory Bose speaker between the two bucket seats
-
Stereo had to be turned up a bit to give the same volume level as original Bose speakers. Yes, Bass was better, but still very weak. I wanted the 10" powered sub to go under the passenger seat - I wasn't sure about hiw the rear heating du ts would affect the subwoofer. How are you dealing with that?
-
Forum Statistics
250.4k
Total Topics2.7m
Total Posts -
Member Statistics
342,743
Total Members8,960
Most Online
-
Who's Online 9 Members, 0 Anonymous, 842 Guests (See full list)