MeanGreen1911

pm sent

bump

First post has been edited with reduced prices.

Bump. Offers?

Hold for future items

Hold for future items

**Reduced Prices for Some Items** I have sold my 2014 Sierra 1500 (5.3L 4x4, Crewcab SLT). The following items are for sale since I no longer need them. I will add things to this post as I get them photographed. Prices do not include shipping. I will include the approximate weight so you can check what shipping charges may cost. I will check what shipping will cost before you purchase something so we can come up with the total price...I will just need your shipping address at that point. I am willing to ship the lighter and less expensive items USPS but I would prefer to ship the heavier/more expensive items through UPS since they seem to be a little more reliable. All items will ship from either 28107 or 28110. I may be able to meet someone in the Charlotte, NC area if you are close. We can work that out by PM on a case by case basis. Feel free to PM me with any questions. Motofab CH-2LM-2 leveling kit 2 inch - *SOLD* Approx. 3 lbs Brand new and never installed. Airaid Jr. intake kit with synthamaz dry filter p/n 201-785 - $130 plus shipping Approx. 8 lbs The tube was used for about 3 months but the dry filter was never used as I had just installed a brand new paper filter at the time. The filter is brand new in box. Sharkfin antenna p/n 23447542 (I think. See photos for p/n decal)- $20 plus shipping Approx. 1lb Brand new and never installed. Purchased to colormatch but I never got around to it. Mirror caps (textured plastic and sanded down for paint) - $10 plus shipping Approx. 1lb Brand new and never installed but they have been sanded some. I started sanding them to get them ready for paint but I never got around to priming and painting them. Tailgate handle with hole for backup camera - $25 plus shipping Approx. 1lb Brand new and never installed. Purchased to colormatch but I never got around to it. Tailgate handle with chrome pull but does not have hole for backup camera - $25 plus shipping Approx. 1lb Brand new and never installed. Purchased to use the chrome handle on a colormatched surround but I never got around to it. Driver's side assist handle (tan color) - $30 plus shipping Approx. 2 lbs Used in my truck. Comes with bolts. I had to trim the locating pin on the back to install and it has a tiny scratch at the bottom. I don't remember if the scratch is visible once installed. Driver's side A pillar cover (from 2015 regular cab 1500 sierra and gray color) - $10 plus shipping Approx. 2 lbs Center console organizers (fit in the full length floor console in my SLT) - $15 plus shipping Approx. 3 lbs One organizer is multiple parts and fits together for the lower part of the console and also a tray for the upper part of the console. I don't want to split these up. You get both. Husky Xact Fit floor liners p/n 53111 and 53211 (front and rear set) - $150 plus shipping Approx. 15 lbs I used these in my truck and they are still in great shape. I do not want to break the set up at this point. They come with the anchor for the passenger side although I never used it. The drivers side snapped onto the OEM studs in the carpet and the passenger side stayed in place OK without the anchor. The anchor is included so you can choose to use it or not. The badge on the drivers side started coming loose so I glued it back on at one point. Chrome door trim for a crew cab - $10 plus shipping Approx. 3 lbs Removed from my 2014 crew cab. Good shape. You will need to remove the old double sided tape and use new tape to reinstall. Rear tire aero flaps - $10 plus shipping Approx. 2 lbs Removed from my 2014 crew cab. These are the guards/flaps for in front of each rear tire. OK shape. Some wear from rocks and road debris. Comes with bolts. Tri-Fold Soft Tonneau Cover (I think its a Bestop 1621101 EZfold Soft Cover) - $100 pick up only No Shipping Removed from my 2014 1500 crewcab short bed. It's in good shape, not perfect. It had one small puncture near the front on the passenger side. I patched the puncture with a patch kit and after it was watertight (photo of the damaged area included). This cover attaches to your bed rails with cam levers and can be removed in a few minutes if you need to haul something.

Man that looks good. I appreciate the info. The panels on my rear doors are a little longer. I will do some measuring before ordering.

Awesome. If you don't mind me asking, how much material did you purchase and where from? Do you have a crew cab?

That looks really nice. What material did you use? I have looked into some dark brown/grey wood grain 3M Di-Noc to wrap my wood trim in. I can decide if I can make it look nice. I won't be satisfied unless it looks as good as yours.

Thanks for the info. I was hoping it would open out over my tailgate some and not just parallel to the tailgate.

I am wanting one of these but I am curious of a few things... Can you mount it any height? I am thinking I want mine mounted pretty high (right under my bed cover). Does it swing out to 90* then stop or will it swing out over the tailgate? To mount it higher, it would need to do this so I can open the top when my bed cover is on.

Get you a bulb type syphon hose from Harbor Freight and syphon the old out. Then you can change fluid types whenever you need to. I think those contraptions are $4-5. Sent from my iPhone using Tapatalk

I crossed 80k miles today. Sent from my iPhone using Tapatalk

You will love them when you get the replacement. I’m very glad I decided the get the huskys instead of the weather tech. I bought WT for my wife’s car and regret it. They aren’t nearly as nice as the X-Act mats. Sent from my iPhone using Tapatalk

Awesome. I’m about to do the same. I didn’t realize there were ones already painted so I bought a new plastic one and need to sand and paint it. I should have painted mirror caps, OEM chrome tailgate handle with painted surround and painted antenna. It should look sweet. Sent from my iPhone using Tapatalk

That makes sense. I hadn’t heard of any issues. I wonder if it affects my 2014? Sent from my iPhone using Tapatalk

I’ve only had the tires on for a week. They do throw some gravel but I was coming from some worn out tires with street tread that wouldn’t pick up anything but a nail. I’m going to run like this for a while and see how it is. Those deflectors in front of the rear tires couldn’t have been offering much protection from rocks considering their position. I have never had flaps behind the tires on this truck. Sent from my iPhone using Tapatalk

2014 Sierra. I assume they didn’t come with corner protectors since there is trim around the wheel opening. I have the painted wheel arch trim instead of black. Sent from my iPhone using Tapatalk

I removed the air deflectors in front of the rear tires. The sides look much cleaner now. Before: Dirt and grime behind the defectors: Keep in mind this truck has lived its whole life in NC and SC. I can’t imagine what nasty stuff could have been there if I lived up North. After: Sent from my iPhone using Tapatalk

Out of curiosity why remove the rear defogger fuse? Recall? Sent from my iPhone using Tapatalk

Yesterday did an oil change and changed out the cabin air filter. This is only 1 year old and full of dirt within the pleats. Sent from my iPhone using Tapatalk

I got my truck back after installing 5100s all around. Rides very good to me. Front shocks are set at full height. The new shocks seem to soak up the big bumps very well. I agree with what others have posted about still feeling small road imperfections like expansion joints. I do not believe the small bumps are any worse than my OEM ranchos with 77,000 miles on them. I feel like the small bumps are on par or slightly better than the OEM shocks. I am happy with the 5100s at their price point. I need to snap a few pictures.

I just dropped my truck off at the shop for Bilstein 5100s up front, an alignment and new 275/60R20 Falken AT3Ws on OEM wheels.

Is this because of the upper control arm on the newer trucks? I have a 2014 and was hoping to run 275/60R20 on OEM wheels with my 5100s set at the highest setting. Do you think I will rub with the older UCAs?