turbine4

I bought the bezel with the brake controller off EBAY thinking I could add the controller to my 2018 Silverado. Like everyone else I found out the hard way the automated trailer brake system will not work. I did not want one of the large ugly add on Brake Controllers that bolt onto the dash. I found a really nice one the REDAC PRO ELITE. I took the bezel I bought and used it by gutting the lower part of the switch. Made a new front cover using a PC Case. I made a outer cover over the lower part of the switch. Then a inner cover tracing the inner part of the switch case, then gluing them to together using E6000 Glue. You have to grind down the front of the original switch front to allow it to clip in place with the new (PC Case) front cover. Mounted the control head on the new cover (you have to center and drill hose). Mounted the controller on the front case of the brake controller plug in box. Plugged everything together and went on down the road. Almost looks factory and is proportional and manual.