Mike@SolerPrf

Thanks, Tom. We also have a throttle controller to spice up the throttle body, and they are now FREE with your throttle body purchase. No other Mod will change your truck performance so much for so little, or your money back, including free return shipping. This is a 15-min DIY, and warranty safe Mod that won't cost you a single penny to try for a month.

it gets even better with this deal: Thanks,

See what the Corvette 7th Gen, Camaro 6th Gen, and Cadillac CTS-V 3rd Gen drivers are saying about our products on their 6.2L engines (LT1/LT4/LT5), simply use the web search term "Soler Throttle". The L86 and L87 engines will be as happy. Most importantly, you will be as happy or your money back (you don't even pay shipping), no grief. No other modification transforms your car/truck so much for so little money and so easily. DIY and warranty safe. Thanks!

Hello, everybody. Many of you asked for flow data on our throttle bodies, and we listened. You wanted numbers to replace words and you've got them. Here we go. This test is fairly simple and very effective, it says a lot about a valve, about how air is allowed into the manifold/engine and how much of it you get. It is done by using an airflow bench (a large airflow meter) applying a controlled vacuum at the outlet of the TB just like the manifold does. Air is then drawn into the throttle body through its inlet, we fix the throttle position (blade position) and take a measurement of how much air is being drawn. We do that about 50 times, one every 1-2% of throttle opening, starting when fully closed until it is fully open and we build a flow curve that characterizes the TB. We do all that for the stock TB and for the our Modified ones, and then compare them. Test set up. Figures 1-3 show the flow bench, fixtures, the test sample, and a velocity stack. Results. Figures 4 and 5 show what happens when you go from your stock 87mm TB (6.2L trucks) to our 100mm TB.

Thanks for asking, Bash. The throttle controllers work for all Gen 3 Silverado/Sierra/Suburban/Yukon engines. We are working on the 5.3L TB's. These are engine/displacement specific.

We now have throttle controllers too for all Gen 3 trucks, regardless of engine displacement. In stock and ready to ship. Tested by forum members. Check out their impressions.

Hello, folks. We have been very successful with this simple DIY Mod for the LT1/LT4/LT5 6.2L V8 engine for Corvette, Camaro, Cadillac. If you have the L86/L87 6.2L V8 engine these Mods are right for you too. We doubt there is a more profound change you can make to your Truck or SUV for as low as $350 (both mods) and in 30 minutes of DIY work. Please check us out at : https://www.solerengineering.com/ do not hesitate to email or call w/ your questions. Thanks!