keefsmif

This is a great example of how the drivers side only units are only a partial improvement. Sure, they limit some of the oil from re-entering the intake and coking up the valves, but the valley and passenger side bank are still blowing by into the intake. With about 1000kms on the truck, i found a healthy amount of oil in the stock passenger side pcv tube when changing the intake tube. That passenger line enters the intake after the filter and right in front of the throttle body. This RXP kit is a mess, but it at least seems to capture all sources of recirc.

Happy to be here. First GM truck in 24 years! Bought this ‘20 Sierra 4x4 base a month or so ago and dig into it a bit. aside from interior bits like console storage, mats, trim and some audio, i lowered it 3/4” with a combo of Beltech front 0-3” shocks, that have completely transformed the ride. I was disgusted with how floaty and wallopy the stock suspension was, so opted for the shocks only i lieu of spindles. Couldn’t be happier, highly recommend replacing the shocks whether you’re going up or down. Rear is a Maxtrac 4” axle flip kit. Beautiful kit, installed quick and near seamlessly. There is no C Notch with this kit as i was just unwilling to cut the frame. I cut the brake line holder tabs off the axle, but didn’t cut the bump stop plates off the frame either. For the extra 1/2” of clearance, i couldn’t justify it. I do hit the stops as is though, so some modified sprinter sumosprings are going in in place of the bump stops. I like the idea of the added load, have been very happy with sumosprings in another truck and also replaced the rear swaybar purchase with the sumos to battle rear sway. Wish me luck. GM accessory wheels were financed with the truck, but I’ll replace them before spring I’m sure. They just don’t do it for me. painted the bumpers silver as well and am really happy with that. Range AFM disabler and AFM Jr intake with dry filter is installed for a bit more throat. Overall, very happy and excited for more tuning options to arise.

All, i signed up JUST to post this, as this thread helped my with my powered sub (Rockford P300-10) install. Now that all the guesswork of what colour wire goes to what speaker is done, i ordered replacement door speakers and crutchfield sent me this: Hope that helps anyone else. Thanks for all your efforts.