Jump to content

Seagate Life

Member
  • Posts

    5
  • Joined

Everything posted by Seagate Life

  1. +2 on the Amp Research power steps. I have bedliner material sprayed on my rocker panels, so I couldn't do the LEDs. I peeled out the LED wires from the harness, so install was super clean. Also ran the OBD2 wires through the firewall rather than penetrate the floorpan plug.
  2. Are you looking at Icon K73061? If so, I had this installed on my 2019 2WD RST and can tell you about it.
  3. I tried to get a Fox 2.0 kit last month, but I couldn't find them in stock. I ended up with Icon Stage 1 instead. Extremely happy with ride quality and off road performance. (I'm only 2WD, so nothing muddy or too difficult...just fast dirt trails) It sits little high in front...maybe because it is 2WD and light in the nose, so I'm going to block it up 1" in the back.
  4. Yes, it is the fuel pump. On the newer vehicles with direct injection, GM wants to make sure the high pressure fuel pump doesn't start dry.
  5. You can actually velcro it to the corner support behind the headlight. They now include a bracket that positions the "loose" OBD2 connector in a pretty good location....you might need to chase that down. Here is a quick video on the install I just did.
×
×
  • Create New...