Jump to content

Daryl LBZ

Moderator
 View Profile  See their activity

  • Posts

    10,553

  • Joined

  • Last visited

  • Days Won

    61

 Content Type 

Everything posted by Daryl LBZ

  1. Daryl LBZ
    Thanks!
  2. Daryl LBZ
    Installed some smoke tail lights over the weekend.
  3. Daryl LBZ
    So the next project for the truck is a full front end rebuild. I've already got newer tie rods installed, but I need everything else. I ordered an idler arm last night to start with. I'm going to collect the parts and tear it down to figure out which pitman arm I need, and then I'll pick one up and put it all back together.
  4. Daryl LBZ
    I didn't know that they made filter wrenches...
  5. Daryl LBZ
    Yea the oil pan design definitely didn't help me out any. Does that kit work pretty well? The one I have from Advance Auto is a joke.
  6. Daryl LBZ
    Changed the oil. Couldn't get the filter off so I had to resort to punching a screw driver through it. I think it was tight because last time I changed the oil the trucks engine was full temperature, and this time it was cold. First time I've ever had to get one off that way.
  7. Daryl LBZ
    Thanks! It would look good, but I like to keep the everyday use pieces on the truck stock plastic.
  8. Daryl LBZ
    Thanks! I sanded it until the chrome became thin and then I used a razor blade to peel it off.
  9. Daryl LBZ
    Before and After
  10. Daryl LBZ
    Before and After pictures
  11. Daryl LBZ
    More of the painting process, and the finished product.
  12. Daryl LBZ
    Going through the painting process.
  13. Daryl LBZ
    Finally got her fixed up and out of the garage.
  14. Daryl LBZ
    Finished up body work on the grille, and the cab of the truck.
  15. Daryl LBZ
    Finished up the body work on the cab today. Not much to do on the bed. Also got the grille ready for primer as well.
  16. Daryl LBZ
    Decided to separate the grille shell from the rest of the grille. Currently prepping it for paint. Also went to the junkyard today. Had to get a new interior trim piece I broke during the rocker panel repair, some weather stripping, and a fuel door since mine was rusted. Only cost me $20.
  17. Daryl LBZ
    So yesterday I spent a full day on the truck again. I got a 2nd coat of POR-15 on the frame, and a 3rd coat underneath on the new inner rocker panels. I also got some body work done to the passenger side, and all of the chrome stripped off of the grille.
  18. Daryl LBZ
    Re-painted the frame yesterday using POR-15 this time around. Sent from my SM-N910V using Tapatalk
  19. Daryl LBZ
    So all of the panels are on and the blue has been sprayed. We're waiting until it warms up more to paint all of the silver on the truck.
  20. Daryl LBZ
    Thanks! I had to go all out to completely get rid of the rust. Dad and I got all of the panels welded in last night on the passenger side so all that is left is some body work. Even after that's done we still have to wait until it warms up some to be able to paint.
  21. Daryl LBZ
    Made some progress over the weekend.
  22. Daryl LBZ
    Turned the truck around today and started tear down on the passenger side. I also got my bumper brackets back from the blaster and started painting them. Sent from my SM-N910V using Tapatalk
  23. Daryl LBZ
    All of the new steel is finished being welded in on the drivers side. I'll be starting on the passenger side this week. Sent from my SM-N910V using Tapatalk
  24. Daryl LBZ
    Picked up some new door pins and bushings from Napa. Sent from my SM-N910V using Tapatalk
  25. Daryl LBZ
    Didn't get much done today besides getting more welding gas. Here are some pictures leading up to where it's at now Sent from my SM-N910V using Tapatalk

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined

  • Who's Online   2 Members, 0 Anonymous, 1,607 Guests (See full list)

×
×
  • Create New...