Jump to content

tx2014

Member
  • Content count

    18
  • Joined

  • Last visited

Community Reputation

13 Good

About tx2014

  • Rank
    Enthusiast

Profile Information

  • Location
    Tx
  • Gender
    Male
  • Drives
    2014 Silverado

Recent Profile Visitors

2,005 profile views
  1. This. Also the only problem I've had is that they tend to have a coating on the steel casing so when your rifle is hot and you load another one in the chamber and allow it to cool the casing can become stuck even after the round is fired. Keep the chamber clean and don't leave a round in it if it's going to cool down and you shouldn't have to worry about it
  2. Freshstart12 it looks like in your photo your tires are 275/60r20 I was running 275/65r20 on stock wheels that had a +27 offset with a readylift 2.25" level and had slight rubbing on wheel well liner. But after doing all of the research before going with that setup it seemed I had more rubbing than most, I'd go for it.
  3. Zone 4.5 with a 3/4" spacer under the strut. Rear has zone 4" block with aal. 275/65r20 On a side note would not discourage anyone from installing the lift themselves took about 7hrs for 3 of us not rushing with jacks and stands.
  4. That should be covered under power train? Pretty sure i'll have to get it towed the check engine is blinking when its running.
  5. Drove the truck on about a 40 min trip as I got back super rough idle and truck wanted to die. Tried to restart the truck rough idle wanted to die CEL appeared. Tried to start the truck again and would try to turn engine over but wouldn't. After about 7 hours truck started with a really rough idle (truck shaking) CEL stayed and pulled P0300 (Random/Multiple Cylinder Misfire Detected). Anybody with this? Input? 2014 Silverado 5.3 ~40,000 Mi
  6. Ive been rolling around with one that way for probably a year and have never had a problem with it.
  7. did you have the mirrors painted or do they have color matched pieces?
  8. Thanks guys. Noticed both of yall have the backrack brand, how is their quality / durability?
  9. anyone got one on their 14+ or have pics of one? need one for work trying to decide on style. thanks in advance.
  10. not sure what happend to my pics but that sonoma red though.
  11. thanks guys here is a picture of where it rubs. its the mud smudged dead nut in the center of the photo. almost identical on both sides zip tie should take care of it.
  12. Been wondering the same thing. Discount also inflated mine to 40 psi but the fronts almost look a little low. I have read where a couple guys are running around 55 in the front and 50 in the rear. I'm going to play around with it the coming weeks and see how the ride is affected.
  13. Just got new tires on the other day and really pleased with the results. This is on a ReadyLift 2.25 in the front and 2 in. blocks in the rear. They do rub just a tad on the liner at full lock. Stock Level w/ blocks 275/65r20 ST Maxx's
  14. txtroop1771's 2014 dbl cab Z71

    but seriously.. very nice truck looking forward to see the bumpers on it
×

Important Information

By using this site, you agree to our Terms of Use.