ozone

whats the best way to remove the water stains on the headliner? what product should be used to clean headliner with water stains?

Yes I only used the lowering strut, it's set at the lowest setting which is 2inches.

was not a blown strut, i was told that the stock strut was to compressed with the lowering springs the came with the kit.

THIS IS AFTER

finally got my drivers side front clunking noise issue fixed, by installing belltech front lowering struts part#25004 and also reinstalling the stock springs and removing the drop springs that came with my CROWN lowering kit. truck is riding a lot better. the only issue i have now is, that im getting more front end rubbing when wheels at full lock, than before due to the fact that the truck is sitting a little lower than before. I want the truck sitting level, so now i have to address that problem. either lower the back so more or raise the front a 1/2 inch. THIS IS BEFORE

what was used to lower the front, struts, springs, or both?

what kind of drop did you do? what kind of lowering kit did you use? coilovers from where? or are they adjustable struts?

what kind of drop did you do? what kind of lowering kit did you use? coilovers from where? or are they adjustable struts?

finally got my belltech front struts/shocks part# 25004, will be replacing my stock ones with these this weekend, and hopefully it will get rid of the clunking sound coming from the drivers side front, that im getting everytime i go over a little bump in the road, its getting louder and sounds worse. any thoughts on what the noise could be? anybody????.......

Will do, thanks

Well the shop told me that they overtightened on the strut and damaged it, and ended up replacing it with a brand new one from dealership. Cause originally they thought it was the strut, but after replacing the issue persists. They went over every nut and bolt and said everything was tight, they had my truck for 2 days

bummed got my truck back from the shop, and they couldnt figure out what the clunking noise coming from the drivers side front is. its really annoying, thinking of gong back to stock . good thing is that the shop will not charge me to reinstall stock suspension. wondering if its the crown suspension. ive read through a bunch off pages of this thread and havent encountered anyone else having this problem. worried if i go back to stock and still have the clunking noise wouldnt know what to do next. wondering if i should just try a belltech kit? advice/ comments appreciated. thanks

No, it's not the driveshaft, noise is coming from the front. My previous driveshaft issue was fixed.

had a question, hopefully someone here can answer it. Lowered my truck about a month ago using the crown suspension 2/4 kit. i recently noticed that now i have a clunking noise/sound coming from the front drivers side. i notice it more when driving slow and go over little bumps in the road. took it back to the shop and the checked the every nut and bolt in the front to make sure they were tight. they mentioned that it could be shock the is bad and might have to get replaced. what do you guys think. my truck only has 24k miles.

here are before and after pics. also got the drive line vibration issue fixed