Scottyz71

They are 18x9 Ultra Hunter 203s (i think) -12 Tires are BFG K02s 275/70/18s

It was beautiful on the weekend, I spent some time cleaning up the rig.

deleted, quoted above.

Suuuuper easy install. Phil's harness is plug and play and simply goes between the mirror connection and the door harness, it took longer to get the door panel off lol.

Finished the heated steering wheel install once pgamboa's harness arrived - a week earlier by the way, great service, thanks again, Phil! I also order the pnp harness to turn my tow mirror front facing running lights into signal lights also. video-1556639539.mp4

The wheel I used was 23423473 which was superseded by 84353113. The wheel is model/make/trim dependant. I searched gmpartsdirect for 14-18 Sierra wheels and each year the old part number came up, so it was a safe bet that this wheel would work on my truck - 2017 Sierra SLE. The clockspring was purchased from GM parts direct is 23381964.

Sure. I scored the wheel from a user on here for 120, new clockspring from GM was 52$ and custom harness from pgamboa 25$. I'm all in for 200$. A new wheel from GM is 230$, I think I did pretty good.

Excellent choice, easy install. Biggest problem for me today was fishing the airbag wire of the original clockspring out, what a pain!

Heated steering wheel install once my clockspring arrived in the mail.

I picked up my Range AFM yesterday, scored a decent deal off eBay and luckily it already had the newest version installed. I instantly noticed a difference in driveability, much snappier throttle response (even with my pedal commander) and have yet to see it drop into v4 or throw any CELs. Driveability alone makes this a must have, the truck is finally starting to feel like it should have come from factory - can't wait to feel how it drives with the updated pedal, with these other items running together.

Yea that's usually the hardest part is splitting them apart. I had done my Porsche headlights a few years ago to convert to projectors and HIDs, I was always worried about moisture after the fact

Front end looks great! How were those switchbacks for install? I've been looking at doing that install on my truck.

Almost a year to the day old, 17,xxx kms

it’s just leveled, 2.5” I believe, not sure what brand, the dealer installed it before I bought the truck. My wheels are 18x9 -12 Ultra Hunter. Tires are K02s, 275/70/18, go rhino raptor style boards, syppo tow mirrors w/ pgamboa's custom wiring harness

Just snapped this picture tonight after spending the day at a friends place.

Just wanted to send a big thank you to Phil for providing the community with his resources. I purchased a set of Syppo tow mirrors for my 2017 Sierra SLE, and Phil's DIY kit. Shipping from Phil was fast, instructions were straight forward. I started with the passenger side, took me about an hour or so from start to finish, then about 15 minutes on the driver's side. With his DIY kit, each door harness is required to be removed, then Phil's kit wired in and pinned in the door & mirror connection. I also installed the diodes for the bcm mod, that took about 30 seconds. Phil was quick to reply to a couple text messages I sent throughout the process to confirm the direction was going. I would not hesitate to work with him again in the future.

Yup, it’s just leveled, 2.5” I believe, not sure what brand, the dealer installed it before I bought the truck. My wheels are 18x9 -12 Ultra Hunter. Tires are K02s, 275/70/18

The weather was decent the other day so I swapped my summers back on, gave her a good wash and decided to take off the lower bumper spoiler, looks much better!

Just caught the sunset last night.

Quick wash today, sun is finally shining!

Here is one from a few days ago after a mid-winter bath. Camera really didn’t do it justice at sunset.