That seems really strange that they would give 2 different names to the same paint code Sent from my SM-G950U using Tapatalk
Bizon14 started following Discovered! Features you may not have known about... and What have you done to your K2 today?
You only have summit white? I'm looking for olympic white
Did you end up finding a part number for this? I'm looking for this too Sent from my SM-G950U using Tapatalk
Appreciate the link! I will look into it a bit. I have found a handful of sites that sell it, but almost all of the sites have terrible ratings with a lot of people claiming that they have been waiting several months and are not able to contact the sellers.
Awesome, thank you for the direction! Now to figure out if it is going to be easier to find just the harness 23327843 (not interested in the OEM lights), or if it is going to be easier to use the dummy plug to make a harness.
Okay that makes sense. He took a look and it said the dummy plug is a 6 pin, the only problem is that I have found the two different part numbers for the harnesses, but I have yet to find a good description of which harness is which. I have a hard time blindly trusting the fitment guides online, but from these I am thinking that the 6 pin harness should be 23327843, and the 8 pin harness should be 22878806. You wouldn't happen to have the part number for the 8 pin harness you bought would you?
I am looking to help a buddy wire some lights in his 2015. I understand that GM changed the plug from 6 pins to 8 pins at some point and I am trying to figure out which one he will need to get. Did you order the 8 pin plug when you really needed the 6 pin plug?
Now that winter is over, I have noticed that when the radiator fan kicks on there is an unusual light grinding noise. I am curious if anyone has had this issue, or knows if there are readily available fan bearings that I could try to replace those before spending close to $300 on new fans.
Hi guys, I have a 2014 ltz with the DL3 mirrors. I had the truck for about a month before I ever noticed that the drivers side mirror dimmed. Now that I know it's capable I pay more attention and it seems like it doesn't work as it should. It usually only dims when it's colder out. Should this dim when the rear view dims or is there another way to know when it should and shouldn't dim? I've also noticed that the drivers side doesn't defrost at all. No problem with the passenger side. I was leaning towards just replacing the glass and hoping that fixed it but the dealer quoted me $200 for the glass and I didn't have any luck finding a dimming and headed mirror online. Also I'm not convinced that the glass is defective as it sometimes dims. Does anyone know about the wiring for the glass? Would it be plausible that the heating element is shot and the the dimmer is going out? Sent from my SM-G950U using Tapatalk
Sorry just seeing your response months later.. I noticed that the drivers side seems to be just a little slower folding so I will dig into it and replace that gear when it warms up! Sent from my SM-G950U using Tapatalk
I stumbled upon a service bullet for the lid squeak in the forums.
Has anyone noticed their mirror shakes at freeways speeds, especially headed into the wind? I just recently bought a used '14 double cab with power folding mirrors and have noticed that the drivers side mirror shakes a little bit, it is tolerable but I would definitely like to fix it if possible and relatively simple. I can't tell if it is the glass or the housing, and I haven't been able to find anyone mentioning the same thing. I was wondering if anyone had dealt with this before taking apart the door to try to tighten the nuts holding the mirror to door. I will likely wait till spring or summer to remove the door panel since it is winter and I am not a fan of popping plastic clips when it is cold out because I really don't want to break anything.
Does anyone have any tips for trying to keep the rust down during the winter? I bought a used '14 double cab, and I know that being in the rust belt we are pretty much screwed anyways but I want to try to preserve the frame as best as possible. Unfortunately I park outside, so I am somewhat concerned with freezing.
Most OnlineNewest Member
Who's Online 129 Members, 0 Anonymous, 2,447 Guests (See full list)
- William McGregor
- Jeremy Williams
- Booger T
- Peter Thiessen
- Gary Lamborn
- MTU Alum
- Michael Sousa
- kickass audio
- Ithan Henry
- Scott Amy
- TJ C
- Adyn Bell
- Matt Bode
- Distinguished USMC
- Big Whiskey
- Greg Neumann
- HK GUY
- Zachery Platt
- Grumpy Bear
- The G-Man
- Pate Services