TJL72

Still seem to be higher than most ....am at 19,000km, used full from new tank, plus 4 boxes and have low warning again. That is approx 15gal/60L of DEF so far???? at 2% of fuel should be 40L I think???

10-11 L/100KM or 25-22 MPG. Gets to 9L or 26 MPG on longer runs w no traffic but thats not driving easy.

I just came to say the same thing about a lot of DEF usage on a 3.0 - 10,000km and have added 5 gallons after the full tank when purchased and below half already - at 10L/100km I should be at 20L DEF used by that calc but am more like 30-35? I also had a RAM eco and saw 12K-13K before needing to put any in?

@Mjdawg1 I didn't think you could lift trucks with the ARC suspension? Is it a special kit?

So I don't mind the steps and they are kinda cool - still getting to using rather than stepping over fixed ones. Is there a way to have them stay out when parked to keep parked cars further away? I find people park closer to me now without seeing steps out there maybe?

I drive 30k-35k per year so not sure if this is worth $1500? 3 yrs or 80,000 km limit.

I drive 30k-35k per year so not sure if this is worth $1500?

On the fence about a truck I found with power steps - heard of issues in winter in Ontario but many success stories as well. Getting a good deal so they work out to be pretty much free and I get truck sooner than ordering....thoughts/experience? I also like the standard ones on my 22 - keeps things away from doors. Is there a way to have the power boards stay out when parked for same effect?

Does anyone have a screenshot of the display when a properly working for wire trailer is connected? I took it one of the rear trailer lights and the ground is fine… I’m thinking there must be a break in a running light power wire somewhere. Do I just start at the front and make my way back?

Yeah it was dirty and was cleaned out prior to this - I think it’s a ground wire somewhere just have to find where. if the 4 pin is connected properly through adapter should the display show that? I’m still confused why it shows the circuit for reverse - number 4 - as connected when adapter has a plastic knockout in that position???

So I’m not sure what’s going on with my trailer. Using a seven pin to four pin adaptor and have tried three of them with the same result. When running lights are on I get a fast left signal which throws a code in my display. Sometimes when the running lights are on, they don’t work and there is an error for them and then the left turn issue goes away. When running lights aren’t working if I turn my lights on five or six times they suddenly start to work again. seems odd that when connected it shows pin 4 active in the display as per photo but does not show the ground connected either in the four way image

Yes I have towed with it a and the 5.3 few times - yes 10 Spd and no its not max tow - it doesn't struggle as it has the numbers but eats fuel which is why I want the 3.0.

Ok then - I guess I got it backwards!! Seems steep for the diesel….. and I thought when i did the build that’s what it told me. Guess I’m would rather use the X-31 package than the max tow.

Trailer probably 2,500 lbs (7x22 snow w 5’ v- nose. 4 sleds another 2,500 or so which would be 5k-6k total weight of trailer?

Yeah I was thinking I wanted Max Tow as well but in the 3.0 babymax option I think gearing goes from 3.23 to a 3.42 so not a big change really for all I tow..... Also the Denali I think adjusts suspension (shocks only I guess) to help trailering from the video I saw from TopTruck. Still that ARC being part of an almost $6K MSRP jump is tough when looking at the differences.....which am still doing. Dealer was trying to tell me Denali keeps a couple % better resale value so with Denali keeping 75% means losing 25% of a $92K truck vs with SLT keeping 73% and losing 27% of an $86K truck - its a wash so they say and you drive a better truck???