Vkiester

It seems like it was having the issue the whole time but it got worse when it was cold. It was 75 here the other day and it started without dying but the idle was a bit rough. I also noticed it would fluctuate and randomly go up to 800 rpm then back down to 300 rpm before leveling out around 600. It would do it sporadically as well. I’m just glad it works now

Thanks a ton. The center piece of it was popped way out and it was pretty dirty. Cleaned it and was able to turn the center piece and it screwed back down and the problem went away. Probably needs to be replaced but it at least fixed the problem.

So for my first cold start it will start then die. I give it a little gas and start it while holding the gas down around 1500 rpm and it stays running. If I hold it for about a minute or two until the motor warms up I can let it go back down to idle and it’s fine after that. After the motor is warm I can turn it off and it starts back up fine. But when the motor gets cold again I have the same issue. Didn’t have any issues during the summer and fall but now that it’s getting cold this started. Any ideas???