Jump to content

DEVV08

Member
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

 Content Type 

Everything posted by DEVV08

  1. DEVV08
    The noise is definitely coming from underneath the truck somewhere in the middle. I’ve researched and there’s just too much that it could be. I thought about taking it to a transmission place to get a diagnostic. Road test and computer scan. The noise is pretty annoying you can feel it as your driving whenever it does make it.
  2. DEVV08
    https://youtube.com/shorts/YA_1UqfiU_w?feature=share
  3. DEVV08
    So whenever I’m driving well accelerate I’m hearing some weird rattle noise. It’s off on and on that I hear it. I just replaced the U-joints thinking it would be that but it’s not since I’m still hearing that noise. Here’s some video I took. IMG_0929.MOV
  4. DEVV08
    I measured after I got home from work. I used a 4 ft level up against the front tire outside wall and measured to the fender. I did the same with the rear. Definitely need a 2” spacer for the rear so that all 4 tires line up evenly.
  5. DEVV08
    The fronts measure out with the 1/4” spacer out to be 2” poke. The rear sit pretty flush with the finder. Idk if I need to go with 2” spacers in the rear to match the front?
  6. DEVV08
    Hello everyone, I’m new to this forum. I recently got my truck lifted. It has a 7inch RC strut lift. The shop who installed it added a 1/4 inch spacers on the front for clearance. I was wondering what size of spacers would I need for the rear so that matches the front.
×
×
  • Create New...