Jump to content

Otisdog

New Member
  • Posts

    2
  • Joined

  • Last visited

Everything posted by Otisdog

  1. Well, that was it. I was thinking that ground was for the coils, it is not, it is the pcm ground. Removed it, jumpered it to the B-, and bingo truck starts, runs. Thanks !
  2. Hello all, I have a 6.0 with no spark. 65k, very clean truck. Driving when truck cut out for about 10 seconds, came back on its own, did not put in neutral and crank. Drove another 2-3 minutes, stopped, truck stalled at idle, will not restart. Only cel was a random cyl misfire that would only show at highway speeds occasionally, no drive ability issue, and that was ongoing for the last 1 - 2 thousand miles. Truck cranks, has fuel at the rail and good fuel pressure both with key on and cranking. Can also smell fuel when I remove spark plug and crank to check spark. I have cranking rpms, and I have 13.5 degrees advance at cranking. I have hot at the coils harness both cranking and key on. I have ground at the coils harness. Security light lights at key on and goes out, does not flash. Checked wiring at ign switch, everything seems good there. No codes stored. Any ideas would be greatly appreciated.
×
×
  • Create New...