Jump to content

smcgillis10

Member
 View Profile  See their activity

  • Posts

    520

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by smcgillis10

  1. smcgillis10
    The switch control the ground side of a relay. You need to have the relay coil hooked to power and the switch will connect it to ground Turing it on. Sent from my iPhone using Tapatalk
  2. smcgillis10
    The relays and fuses should go into the fuse block in the passenger side of the dash. Sent from my iPhone using Tapatalk
  3. smcgillis10
    Well after so long of waiting I finally did it. I referred my 2014 Chevy 1500 5.3l. Originally had 3.08 gears. My truck is lifted with 35s and it sucked. Did the swap over a few days. The factory set of rear gears had NO preload on the carrier bearings and the pinion had almost none. The front seemed set up alright. But the gear line was full of metal. Can’t wait til they are broke in. Sent from my iPhone using Tapatalk
  4. smcgillis10
    Sent from my iPhone using Tapatalk
  5. smcgillis10
    Here’s a relay box for the switch boards with “traction control, cab light, and 4x aux switches” has 5 spots for relays. the 5th relay with trigger with the high beams and Turn on the 2 relays I am using for front lighting. Sent from my iPhone using Tapatalk
  6. smcgillis10
    Got my bed rack built. Now onto a roof rack. Sent from my SM-N950U using Tapatalk
  7. smcgillis10
    There isnt really a power wire. These are GROUND side switches. Sent from my SM-N950U using Tapatalk
  8. smcgillis10
    This was almost too much for this truck. Lol Sent from my SM-N950U using Tapatalk
  9. smcgillis10
    Added Mud flaps, bed storage drawers, new rear axle shafts/bearings/ seals, new driveline goes in today, new shoes for the truck and a thinblueline Sent from my SM-N950U using Tapatalk
  10. smcgillis10
    Went the DIY route and added some relay and a spot to add accessory power. Sent from my SM-N950U using Tapatalk
  11. smcgillis10
    No sir. Have had them in for 3 years. No issues. Sent from my Pixel XL using Tapatalk
  12. smcgillis10
    Quick it snowed everyone in the ditch!!! Sent from my Pixel XL using Tapatalk
  13. smcgillis10
    I'll look into that. I am looking at axles because mine are eating rotors. It's wearing them on half of the rotor. Like it's wabbling and touching one side. Sent from my Pixel XL using Tapatalk
  14. smcgillis10
    After putting my full replacement on I noticed more and more people will cut me off and pull out in front of me. Sent from my Pixel XL using Tapatalk
  15. smcgillis10
    Here ya go. The trucks with the bench and fold down center amplify the shake since there's a lot of flex in how it mounts. Sent from my Pixel XL using Tapatalk
  16. smcgillis10
    The only fixes I have seen is when the rear axles are changed with aftermarket. There's a few guys that have swapped to Yukon axles and have not had any vibration since. I'm waiting for the cash to do them myself, since it's the last thing on the list besides a new truck. Here's one. Sent from my Pixel XL using Tapatalk
  17. smcgillis10
    I'm hoping to replace mine soon. My truck keeps warping rotors. So I'm guessing a have a flange issue. I have had them turned twice. Vibration is lesser after but still there. But comes back and the rotors are warped again. Also I have removed wheels and tires up on jack stands and took the speed to 75. Vibration is there with the truck off the ground and no wheels on the rear. Sent from my Pixel XL using Tapatalk
  18. smcgillis10
    She turned 75 today. Sent from my Pixel XL using Tapatalk
  19. smcgillis10
    Drive in Wyoming Sent from my Pixel XL using Tapatalk
  20. smcgillis10
    Changed my cabin filter yesterday. And then today when I start the truck and turn on the heat I can hear a helicopter sound from the blower motor. Do a quick Google search and find a video of a guy saying he had the same issue. Pulled out his blower motor and there were leafs in the blades. So I pulled mine out and the same thing. So if you change yours and are getting noises. Pull your blower motor and make sure there's no debris on there. Sent from my Pixel XL using Tapatalk
  21. smcgillis10
    Here's some from today. Sent from my Pixel XL using Tapatalk
  22. smcgillis10
    I don't think your bed lights would cause any issues. Pretty sure they are wired in after the switches. Should be fine. Sent from my Pixel XL using Tapatalk
  23. smcgillis10
    4 wire bundle. Was put through the firewall above the interior wire block (looks like a fuse block) a Sent from my Pixel XL using Tapatalk
  24. smcgillis10
    Just a couple be pictures of non oem install. Could have spent way more $$$ and make it look like it should be there. But if it works it works. Sent from my Pixel XL using Tapatalk
  25. smcgillis10
    Went and pulled some kids that were way off the beaten path. Sent from my Pixel XL using Tapatalk
×
×
  • Create New...