jmd1487

Looks good, this is my plan as well. Just a heads up... Your rear shocks are upside down the boot goes on the bottom on these models

So my question would then be what setup is better... Keep in mind I need 2.5" of lift, Run the bilsteins at the max with a RC .5" spacer on top of the strut mount? Or have it on the stock setting with the RC 2.5 lift kit ?

Also do you any height measurements currently?

I have the RC 2.5" kit and we got mine all in spec with stock bolts

Do you have the standard 5100's or the cognito bilsteins ?

Ok did u need new UBolts or did you just swap the block ?

Thanks for the info! Did you leave the rear RC block in or put a larger one in?

I have currently the Rough Country 2.5 lift/level kit with 275/65/20 cooper at3. The ride is ok. I did put bilstein 5100's on the rear which helped a ton! but the front is stock. I ordered a set of 5100's for the front. I'm trying to figure out if I should leave the kit in and run the front shocks on the stock setting or should I set the shocks at the .50 setting and run the 2" lower spacer...? Or run the shocks at the highest setting and run the 1/2" upper spacer...?

So far so good quiet and smooth on the highway tread pattern is very nice much firmer ride compared to the s**t sloppy goodyears!

my setup... 2016 Silverado LTZ 5.3 6 speed Just installed the Rough Country 2.5 lift/level kit along with a set of 275/65/20 Cooper Discover AT3's here is some pics...

my setup... 2016 Silverado LTZ 5.3 6 speed Just installed the Rough Country 2.5 lift/level kit along with a set of 275/65/20 Cooper Discover AT3's here is some pics...