dphel27

Hello, unfortunately I did not. I ended up taking my truck to the dealer to have them look at it. The service manger that inspects all the vehicles as they enter the dealership said there could be a 3/4” difference and still meet gm spec. I ended up trading my truck in for a 19’ Ram that measured perfectly. I had been brand loyal to gm for years and they really let me down with the 19’ Chevy. I understand no truck is going to be perfect and each will have its flaws but some things I feel you just need to get right. I also had other issues with my 19’ Chevy in which the dealer came back to say they were all within spec or they are working on fixing it. I ran out of patience and didn’t want to get stuck with a vehicle I didn’t enjoy. Hopeful you find a solution.

I scheduled a appointment next week with my dealer to have them look at the truck to see if they have a solution to level the bed of the truck with the cab. Without looking at it the service manger seemed to think it’s within Chevy’s spec. He said it’s not that uncommon to see trucks off 3/4” - 1” in the front or rear. Is there any chance that the frame may be bent? I’m hopeful this wouldn’t be the case on a new truck. But find it odd that one side of the bed is higher than the other. I’m going to get more accurate measurements to see how much it’s off. I’ve seen that some guys have had Chevy install shims to fix the problem. Has anybody had this done? Would this disintegrate the strength of the truck at all? Thanks for all the help. I will update after I hear back from the dealer. Dan

Thank you. Where did you measure from?

The truck is brand new. I noticed the 1/4” difference when I was aligning my tonneau cover. From looking from the rear of the tailgate towards the cab you can tell the driver side is higher than the passenger side. Thanks.

Is it common for one side of the truck bed to sit up higher than the other? After installing my tonneau cover on my 19’ I noticed the driver side of the bed near the cab sits up about 1/4” higher than the passenger side. You also can notice that it’s higher from looking at the side moldings of the truck where the cab and bed meet. I measured on a level surface with all tires set to 35psi with a full tank of gas. Haven’t towed or hauled any serious weight in the bed yet. Anybody know if this is within Chevy spec or if I should have the dealer look at it? Thanks, Dan

Update: I dropped my truck into the dealer this morning to have him look at the void line in the headlights. I followed up with the dealership and the service manger told me the headlights were adjusted perfectly. He also said that he test drove a couple other 19 Chevys in the dark this morning and they all had the same void line as mine. The dealer is waiting to hear back from Chevy. I'm sure they will say it's normal just like the stress marks on my door panels that look like dents. Thanks for all your help

I would like to get others thoughts on the startup noise of my 19' 6.2 to see if it sounds normal. The noise I'm concerned about is the noise towards the end after the truck has started. It sounds like a rattling / grinding noise ( hard to describe ). I've got close to 2,500 miles on my truck and just started noticing this noise. It only has happened 3-4 times. It doesn't do it every time but sometimes it's louder and longer then others. When I first noticed the sound I had been driving for about 10 minutes, came to a complete stop the auto start / stop turned the truck off and when it turned the truck back on I heard the sound. It was quite loud and noticeable the first time it happened. I've also had it happen when I've remote started the truck. Thoughts? IMG_5347.mp4 Thanks Dan

Thank you.

Everything on the truck is factory. The black line is still present when I have the low beams on with the fog lights off. The black line remains there when I turn the fog and high beams on. Which makes me think that an adjustment for the low beam lights may correct the black line. I have attached a picture with a circle around what appears to be the headlamp adjustment screw. Can anyone clarify if this is the correct adjustment screw? Also does adjusting this screw only adjust the low beam headlamps? Thanks, Dan

I’ve got a 19 LTZ and have noticed a few people have flashed their lights at me while driving at night while I have the normal beams on. Overall the lights are very bright. I’m wondering if the normal beam leds may be adjusted to high from the factory. I have attached a picture of the led headlights at night. I have an arrow pointing to what appears to be a dark line in the light output. Is this normal? My thoughts were if the lights were adjusted down a bit the dark line may go away. Thoughts? Thanks, Dan

I have the same problem with the camera too. Only happened a couple times when I put the truck into reverse. I haven’t experienced any issues with the sound. My 16 Silverado had some issues connecting to CarPlay and playing sound. So far my 19 has connected to CarPlay and playing sound just fine. Hopefully an update will fix the camera bubble issue.