Jump to content

Big Dog Jim

Member
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Everything posted by Big Dog Jim

  1. Big Dog Jim
    I seen it here before but searching for it, I could not find it. I am looking for information on how to get the sticker sheet of labels for the auxiliary switch module in the attached picture. so you can reassign them for other uses.
  2. Big Dog Jim
    Phil any idea what type/size pins the x550/600 connector uses?
  3. Big Dog Jim
    Thanks Phil, Damn-it should have done my research prior to install and not after, I was counting A1 Auto helping but they were not at all helpful ... ok so at this point I need to tap into the wires connected to X500/x600 connector for corresponding pins #9, 11 & 41. Can you get to the back of that connector in the door jams on each side? Do you have any idea what color the corresponding wires are? Thanks for all the help/info
  4. Big Dog Jim
    Bummer - Wish you had reached out to me before starting. I have provisions for this mirror and a DIY Kit (for $65) and all you would have needed to do is land them at the door jamb. Here is a pic that you’ll need to wire these up. The circuits are at the door jamb. Thanks Phil, Damn-it should have done my research prior to install and not after, I was counting A1 Auto helping but they were not at all helpful ... ok so at this point I need to tap into the wires connected to X500/x600 connector for corresponding pins #9, 11 & 41. Can you get to the back of that connector in the door jams on each side? Do you have any idea what color the corresponding wires are? Thanks for all the help/info
  5. Big Dog Jim
    New to the group and wow all the information is overwhelming, 99 pages on towing mirrors alone. Here is where I need some help, I have a 2018 Silverado 2500HD WT that came with DL8 Mirrors (remote adjust & heat) and I purchased towing mirrors from 1A Auto - but they will not help me with what wires to tap into to add the turn signal, running light & cargo light functions to my new truck to help me tow. I have the mirrors installed, all the wires run through both door jams and into the cab under the dash ... HERE IS WHERE I NEED SOME HELP. Can anyone tell me what under the dash control module, and what wires to tap into to get these new functions to perform? The mirrors I purchased were 1A Auto TRMRP00045 which has a 4 wire harness included to use to tap into the truck, The included wire harness has 4 wires Red = turn signals, Yellow = marker Lamp, White = Positive for high-power LED cargo spots & black = Common ground. See Below PLEASE HELP !!!
×
×
  • Create New...