Jump to content

1Joshman

Member
  • Posts

    22
  • Joined

  • Last visited

Everything posted by 1Joshman

  1. High RPMS? What are the RPMS at high speeds and flat surface? Say at 70 and 75 MPH. MIne runs at about 16/0 at 70 and about 16.5 at 75. This is of course in 10th gear
  2. Greetings Do you have any pictures of the bumper? Just wondering what the measurements are at the end of bumber? <aybe just providing the bumper make and style ? I could look up the demensions then? I still have not installed the other bumper. The one I recieved had an issue and they are sending me a new one when they get it made.
  3. Do you mind my asking, did you stay with the OEM size or buy a tire that was a buit larger?? is was considering going to a LT 295/70R18 for a little but larger size currently my truck has LT 275/70R18 125S ???
  4. I bought a new bumper for my 2020 Chevy 2500 HD for a winch and the wheel liner is hanging down below the bumper. Is there a way to reshape the felt liner rather than just cutting it off. I’m in the upper Midwest, Minnesota, Wisconsin and the snow /salt is simply too much without the wheel liner. Any ideas or experience on how to accomplish this
  5. Leaky transfer case? Yah! well My truck is sitting in the dealership for the last week and expect it to be there a long time! The Torque converter cover needed to put it back together is not available and there is NO ETA on it! The Dealership said they are having problems with the 10 speed leaking. BUT they didn't know the parts where backordered until they have the transmission sitting on the bench?? Can you tell I'm pissed off??
  6. I have a 2020, 2500 HD diesel with the new Allison 10 speed.
  7. Having no dipstick is great Until it isn't! They discovered a few drips of transmission fluid under the truck Thought it was probably the transfer case seal (requires pulling the tranny) But lo and behold it is more serious than this. Waiting for some new tranny parts and maybe a week before I have my truck back. Would have been nice to have been able to check the fluid as I'm pretty sure this would have discovered the problem before it became more serious. Covered under warranty now but what about in 6 years?
  8. Hi Are putting this in a permanent bumper mount or a receiver mount?
  9. Have you had any issues with the power of a 12K winch? wondering about getting the 15.5K?
  10. Greetings I was planning on the same with the receiver hitch mount. can I ask what size winch you went with? It seems the 2020 2500 HD is a bigger truck and I was wondering if a 12000 line pull would be enough to get it out of a bad situation?
  11. Greetings I would like to ask what size/capacity winch you purchased for your 2500? I was considering a 12000 lb winch but dont want to find that I should have gone for something bigger for the 2500 self recovery needs
  12. No one in these pics seems to have a front receiver mounted Winch? All have been on a bumper mount? anyone tell me why they don't like the versatility of the receiver mount/ Is the winch being mounted to strong for a receiver mount?
  13. I have a tuxedo deuce on my 2500 with the 6"8" box. installed easy the one thing i like most about the deuce is that you can open it at the front of the box just behind the cab and fold it back so you don't have to roll it up to get at things that move forward in the bed. makes that new forward box step real handy in the 2020 Chevy. High quality and easy to install At least that's my experience. I had one on the truck before this one too
  14. I will absolutely mention this to them! Hoping for the best and will provide an update. Thank you
  15. well sorry you had bad luck I take it you ended up buying a bumper mount for you winch?
  16. I am researching recovery Winches and systems for my new 2020 Chevy 2500 Diesel. Im looking for feedback regarding the use of a front receiver to put a winch mounted in a receiver hitch mount or getting the bumper with a mount plate to house it permanently in the front of the truck Pics are appreciate
  17. I talked at some length about this with my dealer. They have said that they have not seen intake mods have really not been adding any mileage or performance on the 2020 Duramax also its possible they don't keep salt and debris out as well as the OEM intake. If they see any corrosion in the engine they will deny warranty if anyone has tried one that does improve the mileage I would be interested though
  18. I have had the same issue. Dash rattle. I have had the dealer look at and try a fix twice now and am talking it to another scheduled in two weeks.
  19. Thank you~ Sorry for the slow reply Ill talk to my dealership about this possibility.
  20. I just bought a new 2020 2500 diesel. It had/has/ a rattle in the dash. It is mostly intermittent but generally only at start up. Annoying as all hell. The sales team has tried to fix it and has helped but it still rattles sometimes? Is there a material that could be applied for a fix to this issue? The rattle is at the center of the console?
  21. And like every good fire fighter I can get 10 gallons of ****** into any 5 gallon bucket there is. Never enough room in the truck !
  22. Hi Im looking for winch system and yah Im frustrated. really limited options on the market. Do you have any pics of the modifications you made to retro fit this to your 2020 2500 HD? "The hole which has to align with the tow hook mounting bolt had to be slotted to match up, and we used a 1/2" SS extension plate to bolt to the bottom of the bracket and into the bottom of the frame rail since the frame is not boxed all the way to the end." This is the part I would love to have a picture of. Would really appreciate it. Oh and for what its worth Im also a fire fighter. Lt and technical recue team manager. Very fun
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,695
    Total Members
    8,960
    Most Online
    duramaxbaby
    Newest Member
    duramaxbaby
    Joined
  • Who's Online   3 Members, 0 Anonymous, 419 Guests (See full list)

×
×
  • Create New...