Jump to content

Simsy

Member
  • Posts

    27
  • Joined

  • Last visited

Everything posted by Simsy

  1. Replaced the halogen headlights with headlights from a high country using the Gen5diy wiring kit. The headlights were sourced from eBay
  2. I just swapped one out of an LT model. Pretty straight forward. You will need the lower trim panel listed below if the center console doesn’t have it. https://www.gmpartsdirect.com/oem-parts/gm-lower-panel-84127263
  3. Hey sorry haven’t been on in awhile. If you are still looking this is the one I bought. That being said I believe you can find a non heated wheel a little cheaper, I had hopes of getting the it to work but no luck with that. https://www.ebay.com/itm/2019-Chevy-Silverado-1500-Heated-Steering-Wheel-Assembly-Black-Leather-84755546-/224195903896?_trksid=p2349624.m46890.l49286
  4. Not directly answering your question but I put the metric equivalent of a 35/11.50r20 they are 295/65R20 on without lift or level and don’t rub one bit
  5. They don’t work. From the digging I did a few months ago it is possible to add but will require a new dash harness, gauge cluster, stereo head unit, clock spring and the steering wheel. After you’ve swapped everything over the dealer will need to reprogram the bcm.
  6. For the comparison here’s the stock exhaust on a 6.0 63968706218__8D481BE4-A3D1-4E2D-96EC-C58011F11B4E.MOV
  7. Yes, the Borla exhaust from GM parts. There are times I wish it was not so loud but all in all I’m happy with it.
  8. I get worse fuel economy because I like to hear the exhaust 63968621542__9C102A4A-1B71-4699-A815-438D252B7A82.MOV
  9. I bought the GM Borla system because it doesn’t void any warranty, It bolted on and used the factory hangers, there was no welding needed and came with its own million mile warranty. I’ve done the exhaust shop thing more times than I’d like to admit and it seems like it never lasts more than a couple years if you’re lucky.
  10. No I don’t have an sd reader. My truck is a Custom so it doesn’t support one. As of right now the usb chargers and console interior light are dead. I’m waiting for a harness to become available to retrofit my model truck with the center console wiring.
  11. I bought the Borla exhaust through GM accessories in January. It shipped next day and had it 3 days after purchase.
  12. Any of the next gen center consoles will work 1500-3500 trucks GMC or Chevy. Only difference is the options that come in the console.
  13. Tablet holders with built in usb ports
  14. The steering wheel was new. Center console I have no idea. It was an eBay purchase
  15. Borla Exhaust upgrade. Wish I could upload video because it sounds great?
  16. Swapped the jump seat for a full console. Waiting for the matching trim pieces to show up still
  17. Swapped the original Customs rubber coated foam steering wheel for leather.
  18. Swapped to AT4 wheels with 295/65R20 BFG KM3’s
  19. No they are the same just different logos
  20. I did not have to level and no rubbing at all
  21. Lookup Harnessdr.com. He specializes in up fitting GM vehicles with almost any option they didn’t come with. That being said he is just getting into the new 19+ truck market
  22. I’m wondering if anyone has swapped out the passenger and driver side vent bezels on their WT or Custom package truck? The LT and above trim packages have an aluminum trim ring that I’m looking to swap into my truck to replace the factory black ones and can’t seem to find a part number so I can order them.
  23. Did you ever track down a wiring harness? I’ve done the same and would like to get the console powered up but haven’t been able to find anything on it. I talked to the harness doctor and he said he is going to get around to it at some point but has nothing yet.
×
×
  • Create New...