Scott Haggard

Hopefully someone can help me out here..... got a 2020 sierra elevation does anyone know if I put a 3.5 inch rough country lift on it would I be able to run 35x12.50 with factory wheels? Am I correct in assuming I'll have to have some spacers? I believe 2 inch would work...correct me if I wrong.

Still needing some input from someone on where all the grounds are located. I've found one on the frame horn on the driver's side, one under cab on driver side, on back of the motor, and one on the back side of the gas cap

OK I understand that. Does anyone know where the ground for the taillights is at on the frame?

OK I've checked the wiring at the right rear tail light I've even checked the left tail light wiring and the junction box that they plug into and everything looks good. Any other ideas? Is there a ground wire ran to the frame in the rear of the truck?

I've got 2003 gmc Sierra 2500hd. When I turn my right turn signal on bulb lights up but doesn't flash. It's also causes both brake lights to come on and both of them will start flashing. It's just the right side that does it but it's an intermitten problem. I'm thinking it's in my multifunction switch but not 100% sure. Has anyone else had this issue before? Any help is greatly appreciated

I've got 2003 gmc Sierra 2500hd. When I turn my right turn signal on bulb lights up but doesn't flash. It's also causes both brake lights to come on and both of them will start flashing. It's just the right side that does it but it's an intermitten problem. I'm thinking it's in my multifunction switch but not 100% sure. Has anyone else had this issue before? Any help is greatly appreciated