Hope the following guidelines will help you:
- Step 1: Disconnect the battery. Remove the negative cable from the battery to stop current flowing through the car. Loosen the bolt that holds the cable onto the terminal, remove the cable, and tuck it somewhere so that it does not make contact with the negative side.
- Step 2: Find the switch. To get to the switch, take a look right above brake pedal. The switch is typically a small plastic box with 2 or 3 wires coming from it. It will make contact with the brake lever towards the top, elastic man
- Step 3: Remove the wiring connector from the switch. There may be one or two plastic tabs that you must press for the connector to come out.
If there is resistance, wiggle the connector back and forth slightly while pulling the connector.
own.
- Step 4: Remove a style switch. To remove a style of switch, you have to rotate it in the counterclockwise direction and remove it from the socket. You will not need to use too much force to do this.
- Step 5: Install a new switch
