WesternMike

Got my harness today, will be installing 12v light strips down the sides tomorrow. Great thread.

Painted grill, headlight trim and black piece above Bumper. Then stared the engine bay, a lot more to do in there. Bow tie is still drying, all black. Sent from my iPhone using Tapatalk Pro

Really? And this will stay on well? Sent from my iPhone using Tapatalk Pro

When you painted your grill, did you paint over the crome? Or just the plastic? I want to white out all the fake Crome on my grill. Sent from my iPhone using Tapatalk Pro

Below will show you that ive added homelink to my truck, then used one of the buttons to activate a wireless lightbar in my front grill as well as two cube lights that light up the under body of my truck. This is a great way to have an oem button for your lightbars and very easy to do.

Use the harness and wire your own led lights. So much better than GM ones. Harness - 22878806 Ensure you read the thread in the link cbrsiv15 posted. Sent from my iPhone using Tapatalk Pro

I can regreen a HMI with this? This is a game changer man! Now another question, could this tool allow me to swap a cluster and program it to my truck? I'm crossing my fingers on this one. This thread is gold man. Sent from my iPhone using Tapatalk Pro

With this device I just ordered that you showered me. I could go grab a HMI from another vehicle and regreen it to my own? Sent from my iPhone using Tapatalk Pro

Just that? Then I assume I need software on my pc or something? If you don't mind and have time, send me a message with directions boss. Sent from my iPhone using Tapatalk Pro

What's the cheapest j2534 tool I can buy to do this? This is amazing info!!! Sent from my iPhone using Tapatalk Pro

Will be doing this mod soon. 8" io5 upgrade, upgrading cluster as well as adding in the steering wheel controls with heated steering. Just need to get my cluster which I should have tomorrow then get that programmed.. then work begins. Great thread here.

From looking at the other thread I got the other parts needed. I also changed them so they're easier to find. Console Trim - 23104422 - $29.06 *W/ Homelink Switch - 22774498 - $38.56 Connector - 12167130 - $48.94 8milelake (5 pack) 12V 30/40 AMP SPD - $16.95(Amazon) (Need 2) I got my window for just $50 and will cost $200 to install so all in this mod will cost me just $414.49 Canadian! Once I get all the parts delivered I'll take a video of the process. Sent from my iPhone using Tapatalk Pro

Will be doing this mod soon. We have it all figured out in my thread below. Just waiting on rest of parts to come and I'll film process. https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Egm-trucks%2Ecom%2Fforums%2Findex%2Ephp%3F%2Ftopic%2F201782-Rear-Sliding-Window&share_tid=201782&share_fid=33003&share_type=t

What thread? Could you post a link. Sent from my iPhone using Tapatalk Pro

Did you get this wired up? I'm also about to do this mod. Just grabbed the window and will be picking up rest of parts soon.

So what I see is I can simply run 12v to the switch, then run two wires back to window; one going to up and one going to down? Would this make it work correctly? I'll have the window in two days so I could post photos of connector on it. I'm hoping if I can do this, it will function off of overhead switch(instead of an aftermarket one).

Ok so I'm getting the complete rear assembly for just $50 CAD now. I was quoted just $150 CAD to take my one piece out then install this one from an auto glass place. Then when I'm putting black cloth seats on, I'll run the 12v supply. Which I'm still hoping someone could confirm. Sent from my iPhone using Tapatalk Pro

Ok so if you don't have an LTZ or SLT you will need a whole new body harness; which will run about $1000 CAD. It could be expensive but this would then allow a lot of other options to be wired in, like power passenger seating and heated seating. I was considering doing the entire body hardness swap but I don't think I would have the time and also would then end up adding even more lol But since I can grab the whole rear assembly for very very cheap I may just buy the overhead console plastic and switch for it. I was told I can simply run 12v to it and it should work as it doesn't run to bcm(no programming required). So could I do this with the factory switch? I have plans to put in black cloth on days off so I will be tearing seats out anyways, I now may sound proof entire body and do this mod while I'm at it. Long as I can confirm running a simply 12v to switch then to motor on the window will work. So if someone could help me here, I'll make a nice write up. Sent from my iPhone using Tapatalk Pro

I can get the entire window system plus motor and all for $125 CAD new. So the wiring and BCM programming is what I can see costing money. From what I've found so far only LTZ or SLT gave the harness pre wired for this mod. So I would need to figure out how to run a harness from back to front overhead console(which I'm also about to change out with homelink). For the price I can get the assembly for, I do want to do this and document this. Just need some guidance. Sent from my iPhone using Tapatalk Pro

Ok guys I can grab a complete rear sliding window that has motor in it as well. What I'm wondering is how hard would it to be to make it work with my truck that currently doesn't have it? Looking for some options, I'd like to keep it as oem as possible. Sent from my iPhone using Tapatalk Pro

Just search the forums for under dash lighting. Very easy mod. There's a grey wire on driver side a pillar you can tap into for them to go on with dome lights or you can go into Ignition power like I did for them to always be on when key is turned. Sent from my iPhone using Tapatalk Pro

What size is the plug for this mod? I need to pick one up.

Just picked up a mirror from eBay for $60 CAD with free shipping. Will be doing this to the truck on days off now. Your the man! Sent from my iPhone using Tapatalk Pro

Ok so I have a 2014 Silverado 1500 WT2, got the 4 aux bottoms as well now. I've heard the Fleet tucks(which mine was) can use these. Can anyone give me direction of how to hook light bars up to these in the Fleets? Sent from my iPhone using Tapatalk Pro

Looks like the seats I'm getting are cooled as well so they have the blowers on them already. Will this be a problem you think? As in plug being different? Sent from my iPhone using Tapatalk Pro