WesternMike

Just ordered a set of Doug Thorley Long Tube Tri-Y headers. Already have the diablo trinity, CAI and super 10 muffler so once the headers come I’ll have it custom tuned.

Your truck is looking amazing with that kit on it man, these just complete out trucks I find.

Did you go with the KING suspension? I’ve decided to go with the same kit with the KINGs.

I’m still on the fence on RC or SuperLift. I can get a 8” SuperLift kit or a RC 7” kit. Which would you go with and why? I’m hoping I can get as much feed back as possible on this ASAP as I need to get orders in in two days. Thanks guys.

My bad - that’s where I thought I did post it; thanks for the heads up man.

Hey guys, instead of going though over 400 pages on this subject I’m hoping you can simply reply and help a guy out. Suspension is all new to me, I will also not be installing this; it will be a Shop. I’ve decided to go with RC for everything. I’ve listed the items I’m grabbing below and curious if there will anything else I should do. The truck has 110,000 km on it. 7IN GM SUSPENSION LIFT - GM 7IN LIFTED N2.0 STRUTS - Premium N3 for the rear **GM FRONT ADJUSTABLE VERTEX COILOVERS **GM REAR ADJUSTABLE VERTEX SHOCKS - Kicker Braces - GM Upper Control Arms - GM Traction Bar Kit - GM SS Extended Front Brake Lines - GM HEAVY DUTY TIE ROD SLEEVES | LIFTED KNUCKLE KITS - FRONT CV DRIVE SHAFT ** - I may go with the vertex - undecided yet, do you think they would make a huge difference over the n2 and n3? Any help here is greatly appreciated, totally new to this type of stuff.

Hey guys, instead of going though over 400 pages on this subject I’m hoping you can simply reply and help a guy out. Suspension is all new to me, I will also not be installing this; it will be a Shop. I’ve decided to go with RC for everything. I’ve listed the items I’m grabbing below and curious if there will anything else I should do. The truck has 110,000 km on it. 7IN GM SUSPENSION LIFT - GM 7IN LIFTED N2.0 STRUTS - Premium N3 for the rear **GM FRONT ADJUSTABLE VERTEX COILOVERS **GM REAR ADJUSTABLE VERTEX SHOCKS - Kicker Braces - GM Upper Control Arms - GM Traction Bar Kit - GM SS Extended Front Brake Lines - GM HEAVY DUTY TIE ROD SLEEVES | LIFTED KNUCKLE KITS - FRONT CV DRIVE SHAFT ** - I may go with the vertex - undecided yet, do you think they would make a huge difference over the n2 and n3? Any help here is greatly appreciated, totally new to this type of stuff.

Not one single problem to date! AFM delete from 20k, diablo tune, 91 fuel since birth, mobi 1 full every 5k.. I treat her nicely and she does the same back.. Now it’s getting a complete make over: 7” full suspension upgrade from the bottom up. 20x14 Giovanni Rims - not sure on the tires but 35s EGR Color Matched Flares Custom roof rack Royalty Core RC2X Grill Over $4000 USD in LED systems 12,000lbs RC pro series winch Custom front and rear bumpers Custom head and tail lights - paint matched 1” offset custom gator back mud flaps Rhino Hitch (google this.. amazing) Plus a few more suprises.. Like I said, she treated me well, so now I’m giving her a shopping spree.. lol it’s actually being turned into a show rig for my company Oilfield Now and will be touring oil and gas fields across North America. Be sure to Follow the Build in the build section on here.. I’ll try to keep it up to date as much as possible. Can also follow our Facebook page. If you have any other ideas for this build please share.

Just rolled over 110,000 the other day on my 14’

No headers yet, sorry. I’m still up in the air about the twin turbo build so haven’t added any.

Have had a Diablo tune on for last 75,000km.. not a problem. Truck preforms flawless.

Don’t even ask why I said rubicon lol... what I meant was Recon.. don’t know how I messed that statement up. Just edited the post to correct that and posted the link. Glad you said something. Sent from my iPhone using Tapatalk Pro

Guys, I got a 25% off coupon code from Recon lighting for my Oilfield Pages.. if you need headlights or anything else from Recon and want a nice discount just use “TbOilFieldMember”. I have a lot of sponsors on board turning my truck into a show truck now so I’ll be sure to post deals for you all as I get them. Link: https://www.gorecon.com/m.index.php Coupon code: TbOilFieldMember Sent from my iPhone using Tapatalk Pro

The studs highlighted in red in your photo, are they the ones required for the overlay? Or are they the ones that were on your truck prior? I currently have these studs already on my engine. Just looking to figure out if I’ll need to order the studs are or not. Thanks buddy. Cleans the engine bay up! Sent from my iPhone using Tapatalk Pro

That makes sense, I kinda thought that could be the problem. Cluster is my next mod now. Thanks for the heads up! Sent from my iPhone using Tapatalk Pro

How long did it take to swap it out? Heard it’s a nightmare to get these battery’s out. Sent from my iPhone using Tapatalk Pro

They are interchangeable. Sent from my iPhone using Tapatalk Pro

I was going to do this two times in the past but failed upon going this route. I’m in the process of changing the cloth on my seats from factory grey to factory black. Not a cheap mod to say the least lol I have back done and all head rests, just trying to figure out if I’m going to do heated in the front before swapping the fabric. Congrats on getting the swap to function properly thus far, hoping the heat will function correctly. Sent from my iPhone using Tapatalk Pro

Tried emailing last Sunday within the time periods listed and no reply. Any way to reach you Chris? Sent from my iPhone using Tapatalk Pro

does anyone know the part number for the terminal connector that one would put in the X3 connector on #37 on the X51? Sent from my iPhone using Tapatalk Pro

Putting my build name on my new black cloth I’m installing. Will post photos when finished. Sent from my iPhone using Tapatalk Pro

So I wired the positive for the heated steering wheel the cigarette lighters(as I don’t use them). Works but back lighting for the buttons or light indicating the heat is on doesn’t light up. Heat works perfect however. Anyone know why there’s no lighting? Sent from my iPhone using Tapatalk Pro

Question for guys that added the heated steering. Where did you run the positive wire? Got that installed and just have to wire it, already tested and works. So now want to tap it to somewhere that power shuts off with truck. Sent from my iPhone using Tapatalk Pro

Is there a way I can tell if I have wiring and fuses in place for this? I have the 2014 1500 WT2 Sent from my iPhone using Tapatalk Pro

I've already bought the real 3M automotive strongest double side tape. I'll super Glue to the lights then use the good tape on the truck. Works a lot better than the crap the Chinese put on the lights. Sent from my iPhone using Tapatalk Pro