Jump to content

15KSChevy

Member
  • Posts

    86
  • Joined

  • Last visited

Everything posted by 15KSChevy

  1. ill sell you my h11 xenon depot 5500k kit and my xenon depot 9005 high beam led kit, i had it in my truck with projectors. was awsome
  2. started happing recently on 2015 lt with 60k doors will sometimes re lock themselves after i use remote to unlock. if i lock them again and then again to set the security and then push unlock they will unlock. also they will randomly relock while im driving every few minutes. sometimes doors with lock when i park and pull me keys while jm still setting in seat. anyone have these or similar issues?
  3. 4.5 inch zone with 2 inch bora spacers in rear. 18x9 305/65/18
  4. I have a zone 4.5 with 33s. Me and my brother installed it over a weekend. Have no issues so far rides nearly the same as stock maybe a tad stiffer. I have bora 2 inch spacers in rear looks identical to front looking down front of truck. Wheels are 18x9 -12 offset
  5. Up for sale a Xenon Depot Extreme HID system with PWM modules, as well as a Xenon Depot Extreme Pro LED system. HID bulbs are 5500k H11 (lowbeam). LED is set up for 6000k 9005 (highbeam). Ran these in my 2015 and worked flawlessly. The PWM eliminates any need for an extra heavy duty wiring harness with the HIDs. Both of these together cost aprox $310.00. Would like $150.00
  6. zone 4.5 inch Vs fabtech 4 inch basic
  7. Iirc you”ll want to use 1.75” spacer at least without having to cut your factory wheel studs. Quite a few people go with 2” just because you cant tell from naked eye and eliminates any cutting of factory stud. Bds is top of the line im sure you'll like it
  8. Good looking truck!
  9. This is the 4 inch lift I have https://fabtechmotorsports.com/product-category/chevy-gmc/4wd/k1500/2014-18-k1500/forged-steel-uca-w-factory-standard-shocks/4-inch-systems-forged-steel-uca-w-factory-standard-shocks/basic-systems-4-inch-systems-forged-steel-uca-w-factory-standard-shocks/
  10. That looks nice! What are your measurements from ground to top of wheel wells?
  11. What are your measurements front and back from the ground to the top of the wheel well?
  12. Holy smokes! Dual high beams?! Now all you need is a train horn.
  13. Here is a site that has that but its out of stock..https://www.autofitparts.com/grille-insert-14-15-set-upperlower-chr-whoney
  14. here are the extended ones. I think you could possibly make somethi g similar for alot less money if you are creative and handy. I wish there was a rubber universal type that would fit but I have yet to find one.. Link to extended https://www.shapeways.com/product/FTQHHLVEP/a-single-thinner-extended-silverado-headlight-cap link to oem https://www.gmpartsgiant.com/parts/chevrolet-cover~23215569.html
  15. You can find oem ones on gm parts websites just do a google search for oem silverado headlight access covers for your year make sure you order the correct ones as the top and bottom are different sizes!
  16. Anyone running the fabtech basic 4 inch kit that comes with replacement cross members and knuckles ? I spoke to fabtech and they told me that this one runs closer to 4.5 and the budget kit with new upper control arms ran closer to 3.5??
  17. No one here has a rough country 5” knuckle kit?
  18. Can't decide on fabtech 4" basic system with the replacement cross members or the 5" rough country knuckle kit. Both come with replacement cross members and knuckles, I know the fabtech keeps front track the same. I don't know how noticeable the 1" difference will be. Fabtech told me this 4" kit was closer to 4.5 but haven't read that anywhere on here. Also rough country has a lifetime warranty.
  19. Anyone running the rough country 5” knuckle lift know there height?
×
×
  • Create New...