Shea Albers

My stock were 18s, but considering I still have slight rub on 20s with 0 offset I guarantee stock 20s will have major rubbing

I like the Kryptonite UCA's, but its just been a bit of a pain

I went from stock 18s to XD844 Pikes at 20x9 0 offset. Just ordered some small spacers for the front. I feel like the wheels might touch the arms at full lock at certain angles. If I had to do it over I'd go with the Readylift UCA's and tap grease zerks into the bushing housings

Heads up you'll need spacers or new wheels with their UCA's. Their rep recommended 4.5in of backspacing to me. Ride and look great

Just got Fox 2.5s all around, cognito swaybar and endlinks, and Kryptonite UCA's and tie rod ends put on. Now I just need to figure out what wheels to go with

I'm putting on Fox 2.5 coilovers and Kryptonite UCA's on my 2016 GMC Z71. And before anybody blasts me I've looked and looked, but is anybody running these UCA's with the factory 18in U spoke wheels with a 265/70r18? If so any clearance issues? Also thought about going to 20in wheel with 275/60r20 tires. What offset and backspacing should clear without any trimming? Thanks