Tim Vaughn

@Snowcamo appreciate it brotha the angles are fine at 3 inch the only thing I changed was the aftermarket UCA for better angle on the ball joints other than that no issues. I will probably swap the Motofab UCA for Cognito as the bushings are already failing with less than 10K miles on them but overall I am satisfied with the set up just looking to go away from the spacer for a smother ride. Your gonna have a tough time getting 35's on a 4inch lift without some major trimming, but I use custom offsets and see what other people are running who knows maybe with no offset and a not so wide tire you can get away with the 35's good luck. @SakoSierra let us know how the Icons work out interested in knowing. @dieselfan1 I'm leaning that way on the EIbachs also I jumped the gun and bought the Bilstein 5160's for the rear and know I'm debating if I'll keep them or not. Thanks for all the feedback fellas

Looking for suggestions on front coilovers for 2014 SIlverado 4x4, I currently have a 3" motofab level kit installed including aftermarket Motofab UCA (Which I am not happy with and will be swapping out) Nevertheless I would like to maintain the 3" lift but go away from the spacer to a coilover kit without breaking the bank. I have been looking at the following and interested in feedback outside of going to a full blown 4" lift which I'm trying to stay away from but not opposed too either. Also to mention this is my daily driver so more on road than off road use. Bilstein 6112- won't get me to 3" only 2.75 at highest setting (maybe) Eibach Pro-truck Coilovers 1.75-4" $850 which I'm leaning towards due to price but not familiar with the coilovers I know Eiback makes a good spring which is used on several other brands including FOX Zone Coilovers 0-3" around $2K to purchase (Ouch) Icon 1-3" Coilovers about $1720 these are just a few I have researched but open to thoughts and suggestions and looking forward to the feedback, I'd like to stay under a thousand if possible.

@TriZZZl3 not running stocks aftermarket 22" Hostile wheels with -24 offset I was planning on swapping out for stocks during the winter but now a little concerned with @53boy post off rubbing on stock wheels. Yes they did send the replacement bushings for free mo charge to me just concerned putting more time and money in the same product. If anyone has any suggestions for a good quality aftermarket bushing for UCA let me know.. Thanks

Anyone else running the aftermarket motofab upper control arms for 2.5"-3" leveling kit on your trucks? I installed mine about 4-5 months and 10,000 miles ago and the bushings are failing. Wondering if this is a common problem with these control arms. I know they have not been in stock for quite some time didn't know if it was a supply issue or they were having problems similar to what I'm experiencing. After reaching out to Motofab they did say they would send out new bushings waiting to see if it's the same bushings I have or better. Just hate putting more money into it to have the same problem later.