Jump to content

Anthonyvee90

Member
  • Posts

    38
  • Joined

  • Last visited

Everything posted by Anthonyvee90

  1. Just installed a mishimoto trans cooler in a fresh rebuilt transmission. The question I have is how to I read the dip stick now I waited until the transmission got to 130° and check the fluid while it was running on park. Filled it until it was in the hot section on the dipstick Did I do it correct or do I need to remove some thanks in advance
  2. Recently, my transmission started slipping so I decided to rebuild it and upgrade my circle D torque converter to a 2600–2800 and add a shift kit. I’m taking it to the shop next week. Will I need to tune my transmission or can I just drive off with it? thank you in advance
  3. So my Transmission is starting to slip I just ordered a circle D 2600–2800 TC and the shift kit. Will I need to tune the transmission or can I just run it with the old program? thanks in advance
  4. I was thinking of dropping it myself and maybe going this route Transmission
  5. It’s a 95k I will be dropping the pan today
  6. Headliner did it myself bought online from headlinermagic.net
  7. Sorry by B pillar I meant passenger side pillar
  8. Sorry for the late reply Online GM Parts Center 22894407 - Jet Black Roof Rail Assist 23340560 - Jet Black Passenger Side Windshield Garnish 23369505 - Jet Black Driver Side Windshield Garnish
  9. So drove my truck to work today after a month of not driving it.(have a commuter car). Truck was running fine all day. When I got home went for a food run with the wife, truck felt weird. Had it on drive but wouldn’t move unless I accelerated to 1.5k rpm. Drove it around the block it drove good above 1.2k rpm. Got home plug in the obd2 reader no codes. Waited about 2 hours tried it again and truck was even worse. Didn’t move on drive or reverse unless I accelerated and then it would kick into gear is it time for a new transmission?
  10. So I decided to put 2017 Escalade suede A and B pillars on my Sierra see if they would fit and they do Also the black oh ****** handles off of an Escalade work as well. Going to see if the sunvisor fit as well later this month
  11. The only thing I bought was a wiring harness to by pass the seat memory module on the driver side, But other than that it’s plug and play
  12. Trying to rebadge my truck. Does anyone have the door measurements for the Denali door emblem? I’ve been looking through all the nearby dealers with no luck on finding a Denali so I could take measurements of my own. It’ll be greatly appreciated if anyone who has one can give me the measurements for it.
  13. Any difference besides the buttons?
  14. Looking on adding a 2-step to my Sierra. Is there anyway possible on hooking it up to the steering wheel heating button. Thanks in advance
  15. Mirror this is the mirror I use. I got it last year for 120 from same seller also I think it depends what camera you have.
  16. Reyes told me he wasn’t doing my truck year no more so I decided on doing it myself im not sure though most of the 2014+ truck no one puts a rubber seal
  17. Rubber seal is for the older models. it fits great and no leaks at all
  18. What’s up man I did
  19. Sorry what I meant to say was wired to oem switch location with after market button. Wired to oem switch but wouldn’t work 5 pin usually is pin1:window motor pin2:ground pin3:12v pin4:ground pin5:window motor but couldn’t get it to work if you figure it out let me know please
  20. good eye Mirror-says sold out but if you message him, he’ll sell it to you.Mirror Camera-Part#84486910 Cable-Cable 3rd brake light Gasket-Gasket 3rd brake light still works
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,736
    Total Members
    8,960
    Most Online
    pimafe6931
    Newest Member
    pimafe6931
    Joined
  • Who's Online   0 Members, 0 Anonymous, 674 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...