RGA

Reading thru your links , I never had break pad issues just warped rotors all four ,the 2023 at4 was my 5th or 6th GM 2500 HD Starting in 02 and all those trucks were work trucks I always got dam near 100k miles out of OEM GM BREAKS , A FREIND OF MINE HAD A 2023 2500 HD still does and has had no issues the DIFFERENCE is his is a LT MODEL and does not have the stability control and he still has the truck uses it for work I’m convinced it’s that damn stability control who needs it I don’t need it I can’t delete it I tried to order the new truck without it and couldn’t, The last article you included about Heat not warping brake rotors I’ve read that in the past and I can tell you my rotors looked beautiful no uneven pad deposit where they might the same thickness at every point around the rotor they were warped as I recall anywhere from.012 - .018 that is a lot that was not due to uneven pad wear deposit the pads themselves were beautiful still after 10,000 miles they were at 90% thickness and wearing quite even so who knows we’ll never know because there’s no recall involved FYI AFTER THE REPURCHASE AND CHECKS CASHED I ASKED THE GM REP THAT WAS DEALING WITH MY CASE WHY DID GM OUT OF THE BLUE OFFER TO BUY MY TRUCK SHE SAID BECAUSE THEY KNEW IF I LITIGATED IT THROUGH LEMON LAW IN CALIFORNIA THEY WERE GUARANTEED TO LOSE,,, THE COMMUNIST STATE OF CALIFORNIA HAS ONE THING THAT OTHERS DON’T AND THAT’S THE LEMON LAW OTHER THAN THAT THE STATE SUCKS

Feeling great. I can’t tell you how the brakes are doing because GM bought that truck back and I’m now driving a 2025 AT4X 2500 HD . I do not believe it was a material problem at all it was an issue with their stability control overworking every little movement of the with a steering wheel was causing those back brakes too just constantly over work . If it had simply been a rotor issue GM would’ve just replaced the rotors AGAIN THEY DID ONCE ,,,they wouldn’t have given me a new truck at 10 K over what I paid for the first one they knew they had an electronic issue I hope it’s fixed cause my new truck has the same damn thing stability control , with just under 10,000 miles on it this yea I have had zero issues great truck I think best I’ve ever owned.

I drive a 2025 at4X HD AND THE FRONT DRIVERS SEAT IS SO BAD I ONLY HAVE 6 k on it but im ready to trade it in on a ford I have looked at every posible fix and cant find a good answer

FYI from the day GM offered to re-purchase was back in August 2024 it was November 6 that I actually gave them my old truck and ordered the new one which took three months to get off the assembly line but it was delivered on the day they said it would be delivered so I was technically without a truck for almost 7 months because once they made that offer I stopped driving the old truck as not to get any damage on it or more mileage

Yes GM re-purchased the truck for every single penny that it cost me +3 oil changes an extra year of California registration which is $1000 and 1500 in coupons towards my new 2025AT4X 2500 HD I received the new truck on January 29 the day I fell and broke my freaking hip so I've had the truck now for three months and got 500 miles on it love it

Yes GM repurchased my truck.

Well guys here's the end of my story first picture is the broken rotated femur just below the hip joint and the second picture is the repair check out that hardware and you got a zoom in on it all the way and I guarantee that no one else has hardware like that in their femur, don't tell my wife but while she was out getting me more meds and food and feed me I took my walker and my daughter and she was able to help me climb up into the driver seat sure feels taller than the planeAT4 man is it comfortable the seats are so nice the bigger dashboard compared to the 23 just the layout in general got the safe mounted inside the console the storage box with you know better than nothing plastic gun rack under the backseat heads up display was something I wasn't familiar with at first I could barely see it and I was puzzled but turns out there is a button to raise and lower the heads up display wow pretty nice I'll get it figured out got the OnStar and the my GM app connected paired my phone and drove it for about a 10 mile test drive no worries I hadn't taking any oxy all day so it's all good. It sure feels like it rolls better on the 305s then the 285 that my other truck came with so far I have no complaints how could I it's only just sitting in my driveway got my AirTag buried in it so that nobody will ever find it . Well that is all oxy talking right there Honestly can't wait till I don't need that ****** Doctor says probably another week For the pain to reside

Well guys GM actually came through after the repurchase of my 2023 AT4 that was my retirement truck and it was pretty sweet but I wasn't gonna get stuck with a truck that needed breaks every 12 to 20 kmiles , so a week ago Dublin Buick GMC called to tell me that my 2025 AT4X 2500 HD that was a special order due to the 6.6 gas motor on 11/6 was ready and all detailed out and ready to pick up but it was too late in the day for me to drive 100 miles round trip . so I decided to wash off my Tonneu top that I bought for the 2023 so while I was washing that off soap and water and some stuff to make it shine like new because hell it was new when I took it off . but DAM IF I DIDNT SLIP and fall on my concrete driveway that has a little slope to it not much but wet and soapy that's all it took to slip and fall landed just right and broke my left femur the fracture went all the way through pretty low rotated slid up got muscle damage anyway that's another story in the hospital for a week I cannot even get in this truck it's too tall for a gimp andits too painful but give me a couple weeks, and it was my left leg so all I need is my right go pedal foot I love in this truck man it's looking pretty good inside is loaded got the massaging seats got some other stuff that I don't believe was part of the AT4X package, The good part of this my daughter flew in from Scotland where she lives to help my wife take care of me for a week so that was a bonus out of all of this I only get to see her once a year so now it's twice a year back to the truck it's BITCHEN hopefully they fixed the brake issues they claim to have. I would like to hear some other GM REpurchase stories or am I the only one with a truck story well hopefully the picture loads sorry for the long post guys but that's what oxycodone does to me and the other reason I can't drive the truck happy happy happy as the other part the oxy does to an old 66 year-old man next week on Tuesday

I'm not referring to end play on the hub or the wheel bearings that support the rear hub talking about lateral run out of the hub flange

Good luck are you guys I know other states aren't as easy as California interesting note during that three month discussion with them and their agent they never admitted that this was a lemon they never admitted that there was anything wrong with the brakes they never admitted anything they offered to buy the truck back as a 25 year GM customer . And they wanted to see me satisfied that was pure BS they knew they had a break problem and it's not nothing to do with the quality of the rotors or the pads this is the electronics stability control system, not ABS not the steering stabilizer not sway control but.. .ESC During my personal inspection because I took those brakes apart myself checked the rotors for run out yes I had all eight lug nuts torque to spec during the check of those but I went one step further I put my dial indicator on the rear axle HUB FLANGE if you guys know the three-quarter ton is a full floating axle it's identical to a front hub it is supported by two wheel bearings what I found is that axle Flange .008 lateral run out it should be less.0005 to be within limits. So you could put a brand new rotor on that rear hubs and put a dial indicator on it and you would already have .016 thousands runout which wOULD just compound daily as you used your brakes... I know my two statements contradict each other is that the ESC or is it the poorly machine axle flange I believe it's both.. our rotors are an inch thick and all specs say a rotor that thick can have.002 run out and they will last forever but you put that rotor on a bad axle flange and then throw an ESC system that's out of whack those rear brakes are like a parachute that's how the ESC works it wants to try and straighten you out at all cost by applying just the rear brakes Left and right whatever the computer thinks it needs to do to keep you going straight! I do live at the top of a very windy mountain it's 4 miles long and I don't drive it slow. my four or five GMC Sierra trucks were not equipped with ESC and I never had an issue so I don't know what the heck I know is I'm pretty happy this week I know I got a brand new truck and didn't cost me a freaking dime.

GM bought my truck back full price plus tax and license extra year of reg in California as you know that's 1000 bucks a year plus the couple hundred dollars I spent on oil changes plus a $500 coupon towards a new truck I took them up on your offer I have since ordered a 2025AT4X , we'll see how this one does for you guys that don't push when your brakes go bad under 12,000 miles in California it's an easy lemon law GM knows it I didn't do anything I was in the middle of arguing with them to get it fixed all I wanted was them to fix the brakes a third time they did it twice they refused and in the middle of that argument out of nowhere they offered to buy the truck back how can you refuse I drove 20,000 miles on it for two years and it didn't cost me anything but gas and three month headache but what do you want perfection in this day and age not gonna happen

After opening a case with gm for warranty repair which they denied….pages

I spoke to soon a few days after they denied the brake warranty , they offered to buy or repurchase my truck , at full price + tax and license what the hell is it a trick to get me to spend another ten k on a 24/25 truck what do you think

Well it took three weeks and GMC denied any warranty claim for the warped rotor at 9800 miles Question about warranty on the rest of my brake system if I use powerstop z36 brake kits with drilled and slotted rotors ,what effect will that have on the rest of the brake system , ABS or the ESC ,