Jump to content

jimmyboy8301

Member
 View Profile  See their activity

  • Posts

    2,800

  • Joined

  • Last visited

  • Days Won

    15

 Content Type 

Everything posted by jimmyboy8301

  1. jimmyboy8301
    the GMT 800 was 99-07 (classic) whether it was a 99-02 or 03-07 it's still the same generation. same goes with 14-19 (classic), even though the 14-15 were different they're still K2's.
  2. jimmyboy8301
    Sent from my iPhone using Tapatalk
  3. jimmyboy8301
    how big of a top spacer do you want to add to the bilsteins? the top setting is 1.85" so i wouldn't add more than a 1/2" spacer
  4. jimmyboy8301
    Sent from my iPhone using Tapatalk
  5. jimmyboy8301
    if you're only going up 2" that won't even completely level it out. the easiest way is a top or bottom strut spacer which will take all of an hour if it's under the strut. you can easily clear 33's with a 2" level on stock wheels or even wheels with 0 or positive offset. being a mechanic you should be able to do a leveling kit in your sleep.
  6. jimmyboy8301
    Or the same size wheel that clears the brakes Sent from my iPhone using Tapatalk
  7. jimmyboy8301
    Or get wheels that don’t rub the calibers (the best option) Sent from my iPhone using Tapatalk
  8. jimmyboy8301
    those spacers are most likely the reason it rubs
  9. jimmyboy8301
    i understand that, but he stated he has a " 6" RCX lift" which would indicate it's running at 8" since 6+2=8 , where as he's running a 4" RCX 4+2=6. If he was at 8" ride height and rubbed it would be a lot more disconcerting than being at 6" and rubbing...........
  10. jimmyboy8301
    first off since that's an AT4 according to RCX their 6" kit will not fit it, only their 4" kit. I'd check to confirm it actually has the 4" kit being as according to RCX the 6" kit will not AT4's. I'm assuming the tires are rubbing due to the width and backspace/offset of the wheels and the GMC's HORRIBLE fender design. Your most viable option is to trim the inside of the fenders a little
  11. jimmyboy8301
    mine is the EXACT same way. the bed sits (on mine at least) 1/4" to the passengers side causing the tire to stick out more on the drivers side of the bed. I measured from the frame rail to the wheel well on the bed to figure it out.
  12. jimmyboy8301
    Just make you buy a quality spacer. Sent from my iPhone using Tapatalk
  13. jimmyboy8301
    Look into BORA spacers Sent from my iPhone using Tapatalk
  14. jimmyboy8301
    Thanks! Sent from my iPhone using Tapatalk
  15. jimmyboy8301
    -25 Sent from my iPhone using Tapatalk
  16. jimmyboy8301
    Trash Sent from my iPhone using Tapatalk
  17. jimmyboy8301
    Aahh gotcha thanks! I’m a fan of CC as long as it’s quality, i didn’t have much luck with it on my wheels unfortunately. Sent from my iPhone using Tapatalk
  18. jimmyboy8301
    Thanks!! Ceramic coating? Sent from my iPhone using Tapatalk
  19. jimmyboy8301
    Thank you! Sent from my iPhone using Tapatalk
  20. jimmyboy8301
    Summer wheels back on Sent from my iPhone using Tapatalk
  21. jimmyboy8301
    It rubbed just prior to full lock Sent from my iPhone using Tapatalk
  22. jimmyboy8301
    I had that issue, the tire with stock wheels was hitting Sent from my iPhone using Tapatalk
  23. jimmyboy8301
    I’m at 43.5 F / 42.5 R with a Zone 4.5” with bilsteins set at 1.25” Sent from my iPhone using Tapatalk
  24. jimmyboy8301
    i HIGHLY reccomend them!
  25. jimmyboy8301
    polished the wheels for remounting Sent from my iPhone using Tapatalk

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined

  • Who's Online   2 Members, 0 Anonymous, 1,189 Guests (See full list)

×
×
  • Create New...