blownZ71

Curious if you actually order the pre-painted and from where?

Has anyone found an aftermarket camera that is a plug and play improvement over the stock camera?

Save to assume you already sold these?

Anyone source one of these that were actually black in color like the factory original unit. I have seen several online that show as black but end up being raw aluminum when I go to pick it up. Makes me nervous to order online, and potentially have the same issue. Are the OEM GM parts still black in color? Also, what is the latest part number for one of those units?

I am going to start with grounds on top of the dash that I saw someone having major problems with on another forum. Are there any other secret ground locations I should inspect?

1 year old Odyssey

Reviving this thread for some help. A few months ago I first noticed my doors would occasionally randomly start locking while driving. That stopped and a few months later started having an issue where the doors would not unlock with the remote and now the interior lock buttons don't work either. What is odd is this is completely intermittent. Everything will work one day and then, everything will not work the next day. This is a regular cab, that I added the electronic tailgate lock to, when it is not working, this includes both doors AND the tailgate. Remote will get the lights to flash as normal but absolutely nothing unlocking and no mechanical noise of anything trying to move. Give how it is either all working or all not working, I don't believe it is anything inside the doors but something ahead of that. Any thoughts on where I should start?

Any chance you still have your old bumper lying around ? I'd be interested in taking it off your hands. Thanks.

Did you ever figure out what the cause of this was? My 14 Sierra is doing the exact same thing less the folding mirrors which I don't have. Thanks for the help.

No, they have just been sitting. So your telling me that it was a plug and play replacement for your manual passenger seat, but did not work on your driver side power seat? I figured it would be opposite, as both my seats are manual and the Denali seats do not work on either side.

I am in a similar position as you were. I have the rear leveled with the shackles but want to go lower. Is your front suspension steel or aluminum? As I have not really been able to find any solutions for an aluminum front A-arm setup on a 4x4. How did the alignment go on the front? Also, any rubbing of your 285's, or even close? My 305's barely rub at full lock so just wondering how bad that might get.

I think I am probably going to sell my set of front Denali seats if your interested. Does not look like I am going to be able to swap these for my manual seats unfortunately. They are 14' black denali seats with all options.

Unfortunately I do not have pins #11 or #12. Are you saying you were able to add these pins to the body side of your harness? The regular cabs do indeed have side airbags in the seats. When you say you reused all your OEM SRS equipment, did this require disassembly of the entire seat, or just swapping it over underneath the seat. At this point if I could just add power to the seats so they would work and not have the airbag light on the dash I would be happy.

Based on your experience, I would like your opinion on what I should do and what I can expect to work. I have a regular cab SLE with manual seats for both DS and PS. I also have a pair of Denali front buckets with all options. When I tested them with and attempt to plug and play, nothing worked at all, no power, and airbag light no dash. Any suggestions?

In his second "after swap" photo, does anyone know which color that wood is that comes in the denali? Curly Koa? Grand Momji? Quilted Maple? Grand Lace Wood?

How did you achieve your drop up front on your 4wd? Steel or Aluminum control arms?

Any idea why I would have been getting an airbag error when I tried the passenger seat on the existing harness?

Awesome, thanks Mr. Vader.....with the way this is going, I see myself switching to the Dark Side !!!!!!!!

At this point I would just be happy with power. I have no interest in the memory function but would like to maybe get the heat and cool functions working at some point with help from your other thread once you finalize your thoughts on that. Yes any help with how to add pins to my body side harness would be great. Thanks

What I find interesting is there are several pins that are on the Denali passenger seat harness that show as "Non-Occupied" on the harness diagram. #3,4,10,23,37,40,41,43,44. In the attached sheets, the yellow indicates what is on my existing harness in comparison to the green which is the Denali seat harness. I see that I have Battery Positive voltage on my pin #35, could I jump that to pin #2 even though it is size 0.35 vs 2.5. And having said that how do you modify or change pins on these harnesses? I am good on wiring and soldering just about anything but have never done work like this. As another option, would it be possible for me to replace the body side of the harness, if so where does the other side of it connect to the truck? Just trying to weigh my options, as I am lost at this point.

I finally received my 2014 Denali seats to install in my 2014 SLE regular cab with full manual seats. I tested the passenger side seat and got no power to the seat. I was under the impression that the power functions would at least work and then work on adding the heat and cool functions through some auxiliary switches, but got nothing. See the attached photos of the seat side harnesses side by side and my body side harness. The seat side harness latch was a bit damaged but I still think I got it fully seated. My plan was to replace the harness but now wondering if I should go another route. I'm stuck here, any help would be greatly appreciated. Thanks,