Bigredkyle

Another day, another work truck...

I may be a day late and a dollar short since I'm never on here, but I have 4" of lift with 33x12.5 Toyo MT's on 20's for reference.

As she currently sits...

Beautiful day in Cali...

20x10 AF Liberty, 33x12.5R20 Toyo MT

New socks and shoes- 20x10 AF Liberty on 33x12.5R20 Toyo MTs.

Forces

2.5" level, 1.5" BL...OEM wheels and tires.

Not bad for a work truck on a cloudy day while I wait for my wheels to come...

Truck is back FINALLY...and looking a bit different... Wheels and tires coming in the next couple weeks...

Ordered my wheels and tires...tuck should be back from the shop next week finally! Wheels take a couple more weeks to cut. Opinions please...while my truck is getting repaired, I'm having the shop splash some paint on for me...trying to decide: White painted rear bumper and tailgate handle and factory black plastic bumper cap and steps Factory chrome bumper and white painted tailgate handle, plastic bumper cap and steps I have a white painted front bumper with quad white LED fogs with white housings, factory chrome honeycomb grille, chrome lower skid plate and chrome tow hooks with billet emblem and cleared LT headlights, so my front end is a morph of the two front ends here. I'm not sure if weird to have a painted bumper on the front and not on the back but with the chrome valence it might look OK with white on top of chrome both front and back...othewise its more of the High Country / Denali look.

Truck is almost done at the shop...when I get it back, I'll be going up 4" (2.5" level / 1.5" BL) and running either 33x12.5R20 or 295/55R20 Nitto Ridge Grapplers or Toyo MTs. Wheels will be ordered very soon and I'm debating 20x10 vs. 20x12. It seems like nobody's been able to get that much wheel and tire to work on a 4" without hacking up the fenders much, so unless someone can confirm it works, it'll be 20x10 for me. Put back together soon enough...

Truck is almost done at the shop...when I get it back, I'll be going up 4" (2.5" level / 1.5" BL) and running either 33x12.5R20 or 295/55R20 Nitto Ridge Grapplers or Toyo MTs. Wheels will be ordered very soon and I'm debating 20x10 vs. 20x12. It seems like nobody's been able to get that much wheel and tire to work on a 4" without hacking up the fenders much, so unless someone can confirm it works, it'll be 20x10 for me. Put back together soon enough...

The other two drivers left in an ambulance...My truck is pretty banged up, and other than a pretty gnarly gash on my pinky, I'm good!

Busted up my hand hitting the steering wheel--almost ripped my pinky off, but otherwise I'm good. Both other drivers left in ambulances. No engine damage yet that I know of--shop is still disassembling and getting quotes.

Wasn't today...Truck is in the body shop...some guy in a Rav-4 plowed thru a red light hit head to head with a 2wd Tacoma, and both smashed into me while I was sitting at a red light...needless to say, truck is a work in progress and I'll be back to square one!

Wasn't today...Truck is in the body shop...some guy in a Rav-4 plowed thru a red light hit head to head with a 2wd Tacoma, and both smashed into me while I was sitting at a red light...needless to say, truck is a work in progress and I'll be back to square one!

Thanks Alpine!

Nothing fancy...just washed...

I'd get a 3M eraser wheel, especially if you're taking off molding...will be done in 5 minutes...and if you're like me always better to have the right tool for the job!

Thanks Roger! No, they're not Rigid...they're generic ebay-ish type LEDs that I got from Auto Light Depot in white from the link below. I got two spots and two floods (one of each for each side) and used the installed similar to the write up in the other link, and just painted the housings after I trimmed them to fit. Hope that helps! http://www.autolightdepot.com/18w_cree_led_work_light_p/led-418s-w.htm http://www.gm-trucks.com/forums/topic/166644-silverado-dual-fog-light-mod/

Added Gm factory chrome skid plate and tow hooks...it makes the front end look more finished than the cutout in the chrome bumper to me. Planning to do some more color matching and possibly powder coating the bumpers. Still want to keep the white / chrome theme with minimal black.

I say do it for sure! I've always been a fan of tow mirrors on stanced / lifted trucks. I'm wanting to get the 2015 HD tows for mine and color match inside and out with Klearz clear lens