Jump to content

manderson7015

Member
 View Profile  See their activity

  • Posts

    62

  • Joined

  • Last visited

 Content Type 

Everything posted by manderson7015

  1. manderson7015
    I've installed mine over a year ago and love it. Feedom UCA's, Eibach Pro Truck Kit w/springs, and rear Motofab 2" blocks. Do it right if you got the money or save up for it. Chevy stock shock and springs suck. Mine came with the Rancho's and stamped UCA's. Absolute garbage for a z71 imho. Here's some pics. Sent from my SM-G970U using Tapatalk
  2. manderson7015
    Just upgraded my complete system. Cost around $900 for everything. I did the install and custom ported box myself. I went all out with big 3 upgrade, high output alternator, top of the line wiring, new dash and door speakers, as well as a sub. You will need to purchase a break out harness and line out converter (loc), no matter how big u go. Here are some pics of my set-up. Sent from my SM-G970U using Tapatalk
  3. manderson7015
    So i've had my eibach kit on my 2018 z71 for almost a year and everything is great. I also installed freedom uca's and have the lift at 2.5". Motofab 2" blocks in the rear. Its got the right look for me. I did develop a slight clunk sometimes when i turn steering wheel. Not sure what is causing it. I'm going to raise one more notch on my eibachs when i need new tires. For now im just enjoying the hell out of it.[emoji3] Sent from my SM-G970U using Tapatalk
  4. manderson7015
    Have to put everything back now. Was fun to finally take my truck apart and put back together. [emoji3] Sent from my SM-G970U using Tapatalk
  5. manderson7015
    Got to hear it for the 1st time today. Oh my god does it sound good. I still have to tune it. But that box slams. Pro audio speakers sound so good. Sent from my SM-G970U using Tapatalk
  6. manderson7015
    Picture of my sub box. Tuned to 36hz. This was done using box calculator on the12v website Sent from my SM-G970U using Tapatalk
  7. manderson7015
    No doesnt replace carpet padding. Is thin enough to go underneath no issues. Its butyl rubber Sent from my SM-G970U using Tapatalk
  8. manderson7015
    I built an underseat ported box for my sub. The pro audio speakers go in the doors. Doing that install today. Will post pics soon. Also doing a rear seat lift. Fabricating my own brackets. Sent from my SM-G970U using Tapatalk
  9. manderson7015
    This killmat is some good stuff. Been doing a big audio upgrade to my 18 Silverado. So far got the matting, two front door speakers, high output alternator, and the big 3 installed. Still got the amps, 2 rear doors,2 dash tweets, sub, and wiring everything. Fun-Fun-Fun! Sent from my SM-G970U using Tapatalk
  10. manderson7015
    Anyone have experience with LActrical High output alternators? Sent from my SM-G970U using Tapatalk
  11. manderson7015
    Like the pre-runner look. Sent from my SM-G970U using Tapatalk
  12. manderson7015
    Yes you need spring compressor. Sent from my SM-G960U using Tapatalk
  13. manderson7015
    Look at the Falken Wildpeak at3. They are also a good option and look very nice on our trucks Sent from my SM-G960U using Tapatalk
  14. manderson7015
    Not necessary but when i go 1" higher in the summer i will not have to change my uca's. I was proactive when i did this. Still liking my set up. Sent from my SM-T580 using Tapatalk
  15. manderson7015
    You'll have to cut inside fender well. Sent from my SM-T580 using Tapatalk
  16. manderson7015
    Just that size in general. I wanted that size. Told i had to wait to get. I dunno didnt want to wait. Sent from my SM-G960U using Tapatalk
  17. manderson7015
    Was told that size is hard to get. Sent from my SM-G960U using Tapatalk
  18. manderson7015
    Was getting the rub with stock wheels and tires. Went with18x9 -12 offset wheels and 275x65r18 tires...no rub anymore. 32.3" tall and 11" wide. Sent from my SM-T580 using Tapatalk
  19. manderson7015
    '18 Z71 eibach pro lift set at 2.5", Freedom UCA's,Motofab 2" rear blocks, Avs bugflector 2 and low profile window vents, rough country hd2 running boards, kx offroad 2's wrapped with Falken Wildpeak AT3's. Sent from my SM-G960U using Tapatalk
  20. manderson7015
    Well had to do it. Stock wheels wouldnt stop rubbing at full cock to the right with new Freedom UCA's. Bought some KX offroad (makers of XD) 18x9 with -12 offset wrapped in 265/65-r18 Falken Wildpeak AT3. 33x12.5r18 dont fit. I get the rub on rear fender well and im not cutting or banging my new truck. Ill wear these out then raise my truck another inch and try for 33's next time. Gonna install some lighting next. Sent from my SM-G960U using Tapatalk
  21. manderson7015
    So my first problem with my set-up. My driver side tire rubs UCA when turned to right at full cock. Left side fine. Ordered 1/4" spacers for now. My local shop guy told me running stock wheels with aftermarket UCA causes the rub sometimes? Anyone???? Sent from my SM-G960U using Tapatalk
  22. manderson7015
    [emoji106] Sent from my SM-G960U using Tapatalk
  23. manderson7015
    No everything working great. The Freedom UCA's are similar to readylift. Also they are about 1/2 the cost of Cognito. They look well built. Welds are good. I am enjoying my new suspension. Should have been like this off the lot. Sent from my SM-G960U using Tapatalk
  24. manderson7015
    Eibach pro truck w/ springs, 2" motofab rear kit, and Freedom Off Road UCA's.This makes the truck feel planted and solid. Better than factory ride and makes the truck look aggressive. So glad i did the install. Everything installed in my driveway was about $1100. Next up 33" Cooper XT's, Fender Flares, rear vinyl wrap, and exhaust. Sent from my SM-G960U using Tapatalk
  25. manderson7015
    If you use eibach springs you put on bottom notch wich will still allow for a 3.2" lift. Very nice. Do pull the trigger on these. Sent from my SM-G960U using Tapatalk
×
×
  • Create New...