Jump to content

Nhcampbells

Member
  • Posts

    42
  • Joined

  • Last visited

Everything posted by Nhcampbells

  1. They found a bad connection in a module and repaired it. They did replace a steering angle module, that wasn't the issue. Tech back probed and found the the connection was loose.
  2. UPDATE: 6/28/22 Light came on this afternoon I was near the dealership at the time. they checked for codes and found this. "Lost communications with Steering angle and Electronic brake system". Goes in for service next Friday. Will update again if they find and fix the issue.
  3. So a year later and the same thing is still happening, dealer found no codes. Only when its hot out and comes on at startup the ESC system is off. No cruise available when its on. Of course today I had it at the shop but no light till I got home go figure. An ideas or has it happened to anyone else. No DTC,s I will tr onstar when it happens again
  4. Go to settings and reset system, I had 2 options ( don't recall what they said) but I reset both. Had to enter phone info etc and reprogram the favorite stations but it's worth it as long as it is solved. Basically cleared all the settings. Settings - system- factory reset Good luck
  5. I used the h11 Fahren on both high and lows, so far no issues.
  6. I did the hard reset in April a week after I bought the truck. Its now almost October and have not had to touch the settings since. It works just do it.
  7. I have not. It's so new I'll just tell the stealership at the first service. Just strange it is only on very hot days and not everytime at that either.
  8. Hello all 2021 2500 HD 4X4 with 4000 miles. When we have temps above 90, and I start the truck the Service ESC light comes on and shows ESC is off on vehicle. Then after sitting the next start it is fine. Anyone else have this happen? I will mention to the dealer when I have the first service, but with it being intermittent I'm not holding my breath for an answer from them. Thanks for any ideas and comments in advanced.
  9. Browse the radio menu's to Settings > System > Return to Factory Settings 2) Select Reset Vehicle Settings 3) Wait to reset 4) Select Erase Settings and Personal Data You will need to reset your stations etc. I did both options listed forreset the radio has kept settings since doing this. This was on my Silverado, I would guess it is similar for the equinox. It worked for me and it's been 3 months
  10. Sobby The radio reset works I did mine weeks ago and it is working fine. Others have done the same
  11. Go into settings and scroll till you see Reset I don't recall exactly where but its there. There will be 2 options , I did the reset for both. You then have to program the radio again, phone stations etc.. Mine has been fine since I did it 2 weeks ago. Good luck
  12. Browse the radio menu's to Settings > System > Return to Factory Settings 2) Select Reset Vehicle Settings 3) Wait to reset 4) Select Erase Settings and Personal Data You will need to reset your stations etc. I did both options listed forreset the radio has kept settings since doing this
  13. Go to settings and do a reset of the radio. Mine was doing same thing, another did this and it worked for him. I did mine last Friday and it's held the settings since. There are 2 other posts in regards to this issue.
  14. Do a system reset in settings, it worked for me and a few others on here.
  15. I have to agree, been working fine and the radio comes on when truck is started. Thanks for the tip Like anything else, when in doubt "reboot"
  16. Thank You Random Exactly what I did
  17. I just did a complete reset of the radio this morning. Settings are now working. Only been a day but it's longer then before. Hopefully this solved it. There is another post about this issue also.
  18. So same issue with my 2021 Silverado 2500HD LT 2 weeks old and it would not save the settings, radio wouldn't come on when truck was started. Did the complete reset this morning. As for now the settings I set this morning have worked all day and the radio is on when I start the truck. Go to settings and reset system, I had 2 options ( don't recall what they said) but I reset both. Had to enter phone info etc and reprogram the favorite stations but it's worth it as long as it is solved. Will report back if it fails. Thanks for the info about reset.
  19. Okay here is the update: Had the dealer install remote start today, 2 new key fobs @ 275 + labor for 459 total. Yea I know, hold the "you couda's" lol had the truck for 3 hours with an oil change, wash and a recall taken care of. As of now I am happy! Called the Mylink app for them to update and that should happen in the next few days. Have a great weekend everyone.
  20. Thanks crabbcat. I have the aqq and the au3 code. The part # chevy support gave me were the remotes which say works with the codes I have. Just concerned that they were back and forth if I could do it or not. So confusing. I’m hoping now that support talked to dealer we should be good. Sometimes the more you read the more frustrating it gets! lol. We shall see.
×
×
  • Create New...