Jump to content

Anthony94

Member
 View Profile  See their activity

  • Posts

    16

  • Joined

  • Last visited

 Content Type 

Everything posted by Anthony94

  1. Anthony94
  2. Anthony94
    I added a 1.25 inch block in the back. It sits dead level with all 4 fenders measuring 41 inches from the ground.
  3. Anthony94
    I used the adjustable bilstein 5100 struts on the front set on the 4th setting (.9" for the 6.2L trucks) with a 2 inch rough country lower strut spacer. For a total of 2.9" of lift on the front. The rear still has the factory rancho shocks, but I'll be switching them out for bilsteins soon.
  4. Anthony94
    Picked up this 2021 6.2 last week. 2 inch rough country level with bilstein 5100 struts set at 1 inch and the stock 1.25 inch block out my old 2018 z71. 35x12.50 trail grapplers and a Range Pulsar programmer. All it needs now is some darker tint.
  5. Anthony94
  6. Anthony94
    A/C went out in the obs so the 18 is pulling hunting truck duty
  7. Anthony94
  8. Anthony94
    Swapped out my 2.5 inch RC level for a 3 inch motofab.
  9. Anthony94
  10. Anthony94
    295/70/18 Trail Grapplers and a 2.5 inch RC level.
  11. Anthony94
  12. Anthony94
    2018 and the hunting truck
  13. Anthony94
  14. Anthony94
    Thank you. Zip tied the liners back so it only rubs the sway bar at full lock going forward. In reverse they will sometimes hit the black plastic piece on the cab corner but not enough to bother with trimming it.
  15. Anthony94
    2.5 RC level 295/70/18 Trail Grapplers
×
×
  • Create New...