Jump to content

Matt Castro

Member
 View Profile  See their activity

  • Posts

    31

  • Joined

  • Last visited

 Content Type 

Everything posted by Matt Castro

  1. Matt Castro
    So here is a update: the mechanic I took it to said there was not anything wrong with my suspension but changed out the universal joint. I still have some bad vibrations but it did settle out a bit he did mention that it could be my tires. So as soon as I get a chance I’ll take it in and go from there. Me and a buddy did however open up the differential and noticed the oil was black as ****** and low so we added fresh gear oil and cleaned it up a bit. So don’t know where to go from this point unless I just buy new wheels and tires
  2. Matt Castro
    Yes sir will do I’ll keep y’all posted
  3. Matt Castro
    Yea I been YouTubing it and it don’t seem like much but I’d hate to put everything back together and have extra bolts lol as it always seems to happen
  4. Matt Castro
    Well I was going to try and tackle it myself but I think I’m better off taking it to a shop and get it done. Going to call around and get some prices and go from there
  5. Matt Castro
    Update:: I jacked up the rear and noticed my passenger rear tire has play in it as if some lugs were loose but they are not so I’m figuring it’s the rear axle shaft ima have to replace
  6. Matt Castro
    Sorry didn’t get to it stayed the night at our hunting camp now rushing home for work tonite but as soon as I can I will get to it
  7. Matt Castro
    Yea I could do that first jack it up and use a pry bar and go from there. I was doing some research on google and came across a forum saying the sloped blocks in the rear were no good to get straight blocks not sure if that has something to do with it
  8. Matt Castro
    Yea most definitely going to take the wheels off when I get home and go from there
  9. Matt Castro
    The seat
  10. Matt Castro
    Definitely checking as soon as I get home
  11. Matt Castro
    I’m in corpus but I will definitely look at the shocks. Could it be possible that they are extended to its max
  12. Matt Castro
    Ain’t much play in front it’s more of the rear now and as I’m driving I look at the tires through the mirror and I see some play like the tire is bouncing
  13. Matt Castro
    Thank you I’d appreciate that
  14. Matt Castro
    Thanks that is one thing I haven’t done is the rear. Thanks I may mess with it tomorrow hopefully that’s the issue cause this shake is over the top already
  15. Matt Castro
    Yes I switched out tires from my Yukon and put them on and same thing I have the vibration check balance on them as well I have replaced upper and lower control arms and ball joints I have a bit of play in the front drive shaft where the yolk is but not to sure if it’s supposed to be like that with a lift
  16. Matt Castro
    I recently had some amp steps out on my Yukon and well the front doors seem to work great but the rears don’t wanna make the steps extract down... I’ve tried everything from calling the customer service rep at amp to spraying wd-40 in the lock actuators for the rear doors... it seemed to make the passenger rear work every now and again but the other side nothing.. help!!!
  17. Matt Castro
    2017 GMC Sierra 1500
  18. Matt Castro
    I had my truck lifted about 2 years now and just started noticing a vibration bad. So I did what anyone else would do and jump on google and YouTube. So after replacing my upper control arms and ball joints then my lower as well I still have a shake can someone help I’m at this point desperate
  19. Matt Castro
    has anyone tried to get the charging pad a bit bigger to fit a iphone max in it. if so id like to see some pics im trying to figure out how i could go about doing it with it still looking like it came like that
  20. Matt Castro
    For some reason did you run into a issue where you plug everything in and the right tail light doesn’t work but when u turn the turn signal the reverse light blinks
  21. Matt Castro
    No luck I did swap seats back to factory light went away then swapped driver thats when it came on how would I go about fixing this I am currently disconnected the battery to see if it just clears
  22. Matt Castro
    Yes I have the factory seat belts I never changed them but I did notice the plug on the Denali seat seemed it didn’t snap in on the passenger seat ima look at the stock one and see if it’s doable to take off that one to swap out
  23. Matt Castro
    Yes I did. I tried looking for a code withmy obd reader but it doesn’t pick up everytime I turn on the truck or drive it pops up
  24. Matt Castro
    What if I can’t find a seat position sensor to plug in on my stock seat or on the new leather powered seat
  25. Matt Castro
    Anybody having a issue with having the service airbag light come on after installing new Denali seats. I purchased the seat position sensor harness from Phil but as looking into the seats I am not finding it on either seat
×
×
  • Create New...