I just swapped one out of an LT model. Pretty straight forward. You will need the lower trim panel listed below if the center console doesn’t have it. https://www.gmpartsdirect.com/oem-parts/gm-lower-panel-84127263
Hey sorry haven’t been on in awhile. If you are still looking this is the one I bought. That being said I believe you can find a non heated wheel a little cheaper, I had hopes of getting the it to work but no luck with that. https://www.ebay.com/itm/2019-Chevy-Silverado-1500-Heated-Steering-Wheel-Assembly-Black-Leather-84755546-/224195903896?_trksid=p2349624.m46890.l49286
Not directly answering your question but I put the metric equivalent of a 35/11.50r20 they are 295/65R20 on without lift or level and don’t rub one bit
They don’t work. From the digging I did a few months ago it is possible to add but will require a new dash harness, gauge cluster, stereo head unit, clock spring and the steering wheel. After you’ve swapped everything over the dealer will need to reprogram the bcm.
I bought the GM Borla system because it doesn’t void any warranty, It bolted on and used the factory hangers, there was no welding needed and came with its own million mile warranty. I’ve done the exhaust shop thing more times than I’d like to admit and it seems like it never lasts more than a couple years if you’re lucky.
No I don’t have an sd reader. My truck is a Custom so it doesn’t support one. As of right now the usb chargers and console interior light are dead. I’m waiting for a harness to become available to retrofit my model truck with the center console wiring.